MIDAS/GTSFLAC3D耦合建模新方法及其应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

燕山大学博士基金项目(B245);山西省交通厅科技计划项目(0611)


A Coupling Modeling Method with MIDAS/GTSFLAC3Dand Its Application
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对FLAC3D面向复杂地质体与结构工程前处理建模存在的技术困难与不足,提出MIDAS/GTSFLAC3D耦合建模新方法。即先利用MIDAS/GTS进行三维几何建模和网格划分,然后,基于对两类软件中单元、节点数据关系的差异分析,应用MATLAB编写MIDAS/GTSFLAC3D接口程序,实现了MIDAS/GTS环境下建模的单元、节点信息导入FLAC3D的数据转换。通过下伏采空区矾水沟大桥师婆沟隧道复杂工程建模实例,验证了MIDAS/GTSFLAC3D耦合建模方法的可行性和有效性,为FLAC3D构建三维复杂工程模型提供了新的思路。

    Abstract:

    A coupling modeling method with MIDAS/GTSFLAC3D was put forward aiming at the technical difficulties and deficiencies in preprocessing for complex geologic body and structural engineering with FLAC3D. The coupling procedure was that, firstly, the threedimension geometry model was built with MIDAS/GTS and the model meshes were divided. And Secondly, the element and node data of the completed model built in MIDAS/GTS were exported. After data was transformed by using the interface program in MATLAB, the information was imported into FLAC3D. Thus the threedimension FLAC3D model for complex engineering was generated coupling with MIDAS/GTS. With coupling method, the complex threedimension model was built for Fanshuigou bridgeShipogou tunnel engineering above minedout region, and the results verified the feasibility and effectiveness of the proposed method.

    参考文献
    相似文献
    引证文献
引用本文

王树仁,张海清. MIDAS/GTSFLAC3D耦合建模新方法及其应用[J].土木与环境工程学报(中英文),2010,32(1):12-17. WANG Shuren, ZHANG Haiqing. A Coupling Modeling Method with MIDAS/GTSFLAC3Dand Its Application[J]. JOURNAL OF CIVIL AND ENVIRONMENTAL ENGINEERING,2010,32(1):12-17.10.11835/j. issn.1674-4764.2010.01.004

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-09-18
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: