锈蚀钢筋混凝土梁的抗剪承载力分析模型
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TU375.1

基金项目:

国家自然科学基金(51368006、51678165、51668008)


Shear strength model of corroded reinforced concrete beams
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    锈蚀钢筋混凝土梁的传统抗剪承载力模型大多属于经验模型,考虑的影响因素不全面且缺乏严密的理论推导,导致计算精度有限。基于修正压力场理论,建立了可以综合考虑钢筋锈蚀对临界斜裂缝倾角、梁有效抗剪截面积、配筋率、配箍率等关键因素影响的锈蚀钢筋混凝土梁的抗剪承载力模型,通过与85组试验数据和现有模型的对比分析,验证了模型的适用性和计算精度。结果表明,该模型具有严密的理论基础,考虑的影响因素全面,计算精度较高、离散性较小。

    Abstract:

    The accuracy of traditional shear strength models for corroded reinforced concrete (RC)beam are far from satisfactory, since these models generally belong to the empirical methods which are lack of theoretical basis and do not take into account the various influential factors comprehensively. Hence, a shear strength model of corroded RC beam which takes into account the influences of corrosion on key factors including the critical diagonal crack angle, the effective shear cross-sectional area, the reinforcement ratio and the stirrup ratio was established based on the modified compression field theory (MCFT). The accuracy of the proposed model was validated by comparing with 85 sets of experimental data and several existing models. Analysis results show that the proposed model is of good accuracy and small discreteness.

    参考文献
    相似文献
    引证文献
引用本文

余波,陈冰,刘阳.锈蚀钢筋混凝土梁的抗剪承载力分析模型[J].土木与环境工程学报(中英文),2018,40(6):131-138.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-10-11
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-11-13
  • 出版日期: