考虑温度影响的非关联弹塑性饱和黏土本构模型研究
DOI:
作者:
作者单位:

1.内江师范学院 建筑工程学院 内江;2.重庆大学 山地城镇建设与新技术教育部重点实验室;3.重庆大学

作者简介:

通讯作者:

中图分类号:

TU43

基金项目:

国家自然科学基金(No. 51678094);内江师范学院科研资助项目(No.YLZY201907)


Temperature-dependent non-associated elastic-plastic model for saturated clay
Author:
Affiliation:

1.Neijiang Normal University;2.Key Lab of Chinese Education Ministry for Construction and New Technology of Mountain Cities, Chongqing University;3.Chongqing University

Fund Project:

National Natural Science Foundation of China ( No. 51678094); Scientific Research Funding Project of Neijiang Normal University(No.YLZY201907)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    从不同温度作用下的压缩曲线和回弹曲线出发,利用等效的力学固结代替热固结,将常规温控三轴试验过程中复杂的热力学特性转化为纯力学特性,然后结合传统的临界状态理论,运用非关联流动法则,提出考虑温度影响,适用于正常固结饱和黏土的非关联弹塑性本构模型。整个模型包含6个独立参数,各参数的物理意义明确,且可由常规的温控三轴实验确定。随着温度的增加,压缩曲线和回弹曲线的斜率、临界应力比和泊松比不变,先期固结应力呈指数形式变化,此外,塑性势函数和屈服函数之间的比例因子可通过试算确定。最后结合高岭土和伯克土的常规温控三轴排水剪切试验数据,给出了模型参数的具体确定方法,并将模拟值和试验值进行对比,验证了该模型的合理性。

    Abstract:

    Based on the locations of the compression and swelling curves at different temperatures, the thermal consolidation phase is substituted by a mechanical consolidation phase, which is of the same deformation. Then, the complex thermomechanical properties of soils have been translated into pure mechanical properties. Further, a new elastic-plastic model considering temperature effects is presented by using the traditional critical state theory and non-associated flow rule. The whole model contains six independent parameters, and the physical significance of each parameter is specific and easy to be confirmed through the temperature-controlled triaxial compression test. In addition, with an increase in temperature, the slopes of the compression and swelling curves, the critical state stress ratio and poison ratio have no obvious impacts, while the preconsolidation pressure changes exponentially. Otherwise, the trial method is used to determine the coefficient scale between the plastic potential and yield equations. Finally, the method of determining each model parameter is put forward in detail on account of the drained temperature-controlled triaxial test for Kaolin and Bourke clays, and the new model is proved to be reasonable by comparing the simulation values and test data.

    参考文献
    相似文献
    引证文献
引用本文
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-12-25
  • 最后修改日期:2020-03-04
  • 录用日期:2020-03-12
  • 在线发布日期:
  • 出版日期: