落叶松锯材抗弯强度尺寸效应
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家林业公益性行业科研专项(201104064)


Size Effect of Bending Strength of Chinese Larch Lumber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以兴安落叶松锯材为研究对象,研究了不同目测等级下锯材尺寸与其抗弯强度之间的关系。试验选取1961根6.5、9.0和14.0 cm 3种宽度尺寸的目测等级锯材,每个宽度尺寸分为高、低目测等级组,按照每组试件宽度18倍的测试跨度测试锯材的抗弯强度。利用斜率法和形状参数法确定高、低目测等级组抗弯强度5%分位值的长度与宽度的组合尺寸效应。研究结果表明,斜率法获得高、低目测等级组试件抗弯强度5%分位值的组合尺寸效应分别为0.19和0.23。

    Abstract:

    The relationship between the bending strength and the size of Chinese larch visually-graded lumber was investigated. 1,961 pieces of lumber with three different widths were divided into two groups of high visual grades and low visual grades. The ultimate bending strength was tested under test spans of 18 times test depths. The combined length and width size effects of 5th percentile of bending strength were estimated by the slope method and the parametric method. Using the slope method, the estimated effect parameters of H and L were 0.19 and 0.23 for the 5th percentile.

    参考文献
    相似文献
    引证文献
引用本文

周海宾,王学顺.落叶松锯材抗弯强度尺寸效应[J].土木与环境工程学报(中英文),2013,35(1):117-120. Zhou Haibin, Wang Xueshun. Size Effect of Bending Strength of Chinese Larch Lumber[J]. JOURNAL OF CIVIL AND ENVIRONMENTAL ENGINEERING,2013,35(1):117-120.10.3969/j. issn.1674-4764.2013.01.019

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2013-02-25
  • 出版日期: