微波对污水污泥脱水特性及形态影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金(51104022);北京市属高等学校人才强教深化计划(RHR201008362)


Impacts of Microwave on Dewater Ability and Morphological Feature of Sewage Sludge
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了微波加热温度和温升速率对污泥脱水特性的影响,并对微波处理后污泥的CST、粘度、沉降比、含水率、上清液COD含量、Zeta电位、形态学特征进行了测试与分析。实验结果表明,温升速率为10 ℃/min,加热到70~80℃时中水站污泥脱水特性较好。随温度上升,污水处理厂污泥的SV、粘度、含水率相应降低,COD含量逐渐增加;对比直接从污泥图像与据污泥颗粒的粒径分布得到分形维数与粒径,发现在不同的加热条件下污泥形态有明显变化,加热到60~80℃时脱水特性较好,70℃时含水率最低为83.12%。

    Abstract:

    Firstly the impacts of heating temperature and rate of microwave on dewater ability and morphological feature of sewage sludge were investigated. Then CST, viscosity, SV, moisture content, COD, Zeta electric potential and morphological feature were tested. It is shown that the lowest CST of reclaimed water plant is 4.2s while the heating rate is 10℃/min and heating temperature is 80℃. SV, viscosity, moisture content of waste water plant sludge decrease and COD increases when heating temperature is higher. It is indicated that morphology of sludge changes under different heating conditions from fractal dimension and particle size data which is analyzed from image and calculated from cumulative weight percentage undersize of sludge particle. After 60~80℃ microwave pretreatment, dewater ability is proved.

    参考文献
    相似文献
    引证文献
引用本文

周翠红,常俊英,陈家庆,孔惠.微波对污水污泥脱水特性及形态影响[J].土木与环境工程学报(中英文),2013,35(1):135-139. Zhou Cuihong, Chang Junying, Chen Jiaqing, Kong Hui. Impacts of Microwave on Dewater Ability and Morphological Feature of Sewage Sludge[J]. JOURNAL OF CIVIL AND ENVIRONMENTAL ENGINEERING,2013,35(1):135-139.10.3969/j. issn.1674-4764.2013.01.022

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2013-02-25
  • 出版日期: