EB-FRP及HB-FRP加固预裂RC梁对比试验研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山东大学自主创新基金 (2012ZD032)


Experimental Analysis of Pre-cracked RC Beams Strengthened with EB-FRP and HB-FRP
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为验证FRP螺栓加固新技术的合理性,结合现役钢筋混凝土桥梁带裂缝工作的特点,采用表面粘贴FRP(EB-FRP)加固技术和FRP螺栓混合加固技术(HB-FRP),分别对不同预裂度的钢筋混凝土简支梁进行抗弯加固,通过两点对称加载抗弯试验研究加固预裂梁的受力特性和破坏模式,分析裂缝分布对加固预裂梁的剥离荷载及FRP材料利用率的影响。试验结果表明,与表面粘贴FRP加固技术相比较,采用FRP螺栓混合加固的预裂梁,抗弯极限承载能力提高30%~44%,加固后结构的破坏表现为明显的延性,改善了FRP脆性剥离破坏模式;另外,钢筋混凝土梁裂缝对FRP的剥离荷载、FRP材料的利用率及梁的破坏模式影响显著。

    Abstract:

    On the basis of the crack characteristics of aging RC beam bridges, the cross-section of RC simple beams with different pre-cracking levels were strengthened by the externally bonded FRP(EB-FRP)and the FRP-bolt hybrid bonding(HB-FRP)respectively to check the strengthening characteristics of HB-FRP. The flexural test with symmetrical loading on two points was conducted to study the mechanical behavior and failure mode of pre-crack beams strengthened with EB-FRP and HB-FRP. The influence of pre-cracking level on the FRP initial debonding load and FRP utilization ratio was assessed respectively. The test results show that the flexural capacity of pre-cracking beam strengthened with HB-FRP can be improved by 30%~44% compared with the one with EB-FRP. The failure mode has been changed from FRP brittleness debonding of beam strengthened with EB-FRP to obvious ductility failure of beam strengthened with HB-FRP. Furthermore, the crack distribution of RC beam has obvious influence on the FRP initial debonding load, the FRP utilization ratio and the failure mode of strengthened pre-crack beams.

    参考文献
    相似文献
    引证文献
引用本文

管延华,朱登元,庄培芝,李红超,周志东. EB-FRP及HB-FRP加固预裂RC梁对比试验研究[J].土木与环境工程学报(中英文),2013,35(4):27-31. Guan Yanhua, Zhu Dengyuan, Zhuang Peizhi, Li Hongchao, Zhou Zhidong. Experimental Analysis of Pre-cracked RC Beams Strengthened with EB-FRP and HB-FRP[J]. JOURNAL OF CIVIL AND ENVIRONMENTAL ENGINEERING,2013,35(4):27-31.10.11835/j. issn.1674-4764.2013.04.005

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2013-07-16
  • 出版日期: