湿热地区毛细管地板供冷末端性能实测分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划项目(2016YFC0700301、2016YFC0700303)


Experimental analysis of terminal performance for floor cooling with capillary tubes in hot-humid area
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选取重庆某住宅卧室进行实测分析,在供水温度为20、18、16℃,室外天气为晴天、多云、阴天(雨)工况下,研究毛细管地板供冷房间温度、地板供冷量、地板结露特征。供水温度为20、18、16℃时,室内最高温度27.6℃,最大供冷量分别为23、33、32 W/m2。开始结露时间为10:30-14:50之间,其中80%区域开始结露的时段为11:00-13:00之间,室内气流涡旋区最早出现结露。供水温度为18℃时,除湿能明显改变地板结露现象;供水温度为16℃时,除湿能改变大部分地板结露现象,室内气流涡旋区仍为结露区,但结露时间延后1 h以上。地板结露区域与室内气流组织有关,毛细管铺设位置应避开房间气流漩涡区。

    Abstract:

    Indoor temperature, cooling capacity and condensation characteristic of capillary tubes for floor cooling were specially investigated with 20℃,18℃,16℃ inlet water temperature. Experiment was carried out in a bedroom in Chongqing in sunny, cloudy and overcast weather condition. The results showed that the highest indoor temperature was 27.6℃, the maximum cooling capacity were 23 W/m2,33 W/m2,32 W/m2 respectively. Adverse condition of condensation was happened between 10:30 to 14:50, among which 80% area started condense from 11:00 to 13:00. Indoor air eddy area was very easy to be condensed. The dehumidifier could reduce condensation dramatically with 18℃ inlet water, but eddy area was still condensed with 16℃ inlet water, The condensation area was related to indoor air distribution, the capillary tubes should be installed avoid air eddy area.

    参考文献
    相似文献
    引证文献
引用本文

刘猛,王旭弟.湿热地区毛细管地板供冷末端性能实测分析[J].土木与环境工程学报(中英文),2017,39(1):1-6. Liu Meng, Wang Xudi. Experimental analysis of terminal performance for floor cooling with capillary tubes in hot-humid area[J]. JOURNAL OF CIVIL AND ENVIRONMENTAL ENGINEERING,2017,39(1):1-6.10.11835/j. issn.1674-4764.2017.01.001

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-08-25
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-02-08
  • 出版日期: