碱矿渣混凝土配合比参数选择与设计方法
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TU502

基金项目:

国家自然科学基金(51408078);科技部国际合作项目(2009DFR50450)


Parameter and design method for alkali-activated slag concrete mix
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过系统研究各配制参数(如:碱组分、水胶比、胶凝材料用量等)对碱矿渣混凝土28 d抗压强度的影响,深入分析了28 d抗压强度分布规律与方差间的关系。结果表明:碱矿渣混凝土28 d抗压强度符合正态分布,且与水胶比呈明显反比关系。在此基础上,提出了适用于碱矿渣混凝土的回归方程,确定了公式中回归系数αaαb分别为0.796和0.897,得出了碱矿渣混凝土配合比参数选择与设计的具体方法。

    Abstract:

    This paper examined the effects of crucial parameters, including W/B, binder content, alkali component, on compressive strength of alkali-activated slag concrete. Based on results obtained, the statistical distribution and variance (standard deviation) of compressive strength results were estimated, and the analysis results from experimental data indicated that the compressive strengths of AASC at the age of 28 day fitted normal distribution and is inversely proportional to the liquid-solid ratio. The relationship between W/B and compressive strength was established through regression analysis, the regression coefficient of formula αa and αb is 0.796 and 0.897 respectively. As such, a simple mix design method for alkali-activated slag concrete was proposed.

    参考文献
    相似文献
    引证文献
引用本文

杨长辉,杨凯,潘群,陈科,朱效宏.碱矿渣混凝土配合比参数选择与设计方法[J].土木与环境工程学报(中英文),2017,39(4):122-127. Yang Changhui, Yang Kai, Pan Qun, Chen Ke, Zhu Xiaohong. Parameter and design method for alkali-activated slag concrete mix[J]. JOURNAL OF CIVIL AND ENVIRONMENTAL ENGINEERING,2017,39(4):122-127.10.11835/j. issn.1674-4764.2017.04.019

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-06-15
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-06-15
  • 出版日期: