A 3-D finite element model is established by ABAQUS to simulate the behavior of the joints with concrete-filled steel tubular (CFST) column to steel beam using external stiffening ring.The load versus deformation curves of this type of joints are compared between theoretical and experimental results,and in good agreement.Parametric analysis is performed to study the flexural load-carrying capacity of the joint.The width of external stiffening ring,the steel ratio of CFST column,the ultimate strength of steel beam,the strength of steel tube and beam,the concrete strength,the axial load ratio,and the beam to column linear stiffness ratio are considered as parameters.The simplified practical design approach is proposed based on parameter analysis of the flexural load-carrying capacity of these joints.The practical calculated values are in good agreement with the FEM results.