柔性压力管道甩击特性数值模拟
DOI:
作者:
作者单位:

1.武汉大学 动力与机械学院;2.武汉大学 水射流理论与新技术湖北省重点实验室;3.炼焦煤资源开发及综合利用国家重点实验室

作者简介:

通讯作者:

中图分类号:

TG137

基金项目:

国家重点研发计划:2018YFC0808401


Numerical simulation of the flicking characteristics of flexible pressure pipes
Author:
Affiliation:

1.School of Power and Mechanical Engineering, Wuhan University;2.State Key Laboratory of Coking Coal Exploitation and Comprehensive Utilization

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    柔性压力管道作为一种重要的流体输送工具,以适用性强、安装快捷等特点广泛应用于临时或机动工程中,但随其耐压等级与额定流量不断提高,管道的振甩现象愈发突出,甩击事故时有发生,存在重大安全隐患。本文利用ANSYS Workbench平台对柔性压力管道脱扣断裂甩击行为进行数值模拟,研究了管道流速、流体物性参数、管道弯曲长度和弯曲半径、约束位置对甩击运动的影响。结果表明:管道的甩击运动具有很强的非线性特征,脱扣端的变形位移和甩击速度最大,固定端的等效应力最大;随管内流速增加,管道甩击的变形位移、甩击速度、等效应力增加,应变能呈高次方变化;随流体密度增加,管道甩击运动的主要参数都线性增加,流体粘度增加,管道甩击更加剧烈;管道长度越长,其运动周期越长;弯曲半径增大,管道甩击运动的主要参数都减小;而管道安全扣的约束位置主要影响了管道运行的长度和弯曲半径,从而对甩击运动产生影响,管道甩击振动由二阶模态主导。

    Abstract:

    As an important fluid transportation equipment, flexible pressure pipeline is widely used in temporary or mobile engineering due to its applicability. However, as its pressure level and flow rate continue to increase, the vibration of the pipeline becomes more and more prominent , and slamming accidents often occur. In this paper, the ANSYS Workbench platform is used to numerically simulate the flicking behavior of flexible pressure pipeline tripping. Based on this, the effects of pipeline flow rate, fluid physical parameters, pipe bending length and bending radius, and restraint position on the flicking motion are studied. The results show that the slamming motion of the pipeline has strong nonlinear characteristics, the deformation displacement and slamming speed at the tripping end are the largest, and the equivalent stress at the fixed end is the largest; The equivalent stress increases and the strain energy changes at a high power. With the increase of fluid density, the main parameters of the pipeline slamming movement increase linearly, and the viscosity of the fluid increases, and the slamming of the pipeline is more intense. The longer the pipeline length, the longer the motion cycle ; The bending radius increases, the main parameters of the pipeline slamming movement are reduced; and the restriction position of the pipeline safety buckle mainly affects the length of the pipeline and the bending radius, thus affecting the slamming movement;The shock vibration of pipeline is dominated by the second order mode.

    参考文献
    相似文献
    引证文献
引用本文
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2020-09-16
  • 最后修改日期:2020-10-24
  • 录用日期:2020-12-21
  • 在线发布日期:
  • 出版日期: