%0 Journal Article %T 汽车排气消声器内部流场及温度场的数值计算 %T Numerical simulation of the flow and temperature fields in an automotive exhaust muffler %A 李以农 %A 路明 %A 郑蕾 %A 陈清平 %A 郑玲 %A LI,Yinong %A LU,Ming %A ZHENG,Lei %A CHEN,Qingping %A ZHENG,Ling %J 重庆大学学报 %J Journal of Chongqing University %@ 1000-582X %V 31 %N 10 %D 2008 %P 1094-1097 %K 消声器;流场;温度场;双方程 %K muffler; flow field; temperature field; dualequation %X 通过对一典型结构汽车排气消声器进行建模,根据流厨行数值模拟研究,分析气流速度、温度变化及压力分布对消声器性能(声学性能和空气动力性能)的影响。分析得出结论,设计消声器时必须考虑从结构上消除产生高速湍流和高速气流的可能,且在满足消声性能的前提下尽量减少压力损失,减少穿孔结构能有效地降低压力损失。 %X By building a model of a typical exhaust muffler structure, a grid mesh was formed based on the calculation characteristic of the flow field. The software ANSYS CFX then was used to numerically simulate the flow and temperature fields in a muffler. The effects of the gas velocity and temperature variation on sound elimination performance, including the acoustics and aerodynamics performance, were analyzed. The result suggests that highvelocity turbulence and highspeed flow should be eliminated from muffler structures when designed. At the same time, to provide satisfactory noise elimination, pressure loss should be reduced as far as possible. The pressure loss can be decreased when reducing the perforation structure. %R 10.11835/j.issn.1000-582X.2008.10.002 %U http://qks.cqu.edu.cn/cqdxzrcn/home %1 JIS Version 3.0.0