Aiming at the status quote of long time for methane extraction and slow speed for laneway excavating in coal seams of Liziya south 2JHJ well, abrasive water jet slotting technology is adopted to improve the methane desorption and increase excavating speed in semi-coal laneway. Through analyzing damage model and protection against outburst mechanism, the process of Coal-Rock Mass being cut and fractured is studied. Through lab test on abrasive water jet cutting coal-bed gangue, a new abrasive water jet cutting device is successfully designed and made and all parameters are determined. It is showed that abrasive water jet can cut through a coal-bed gangue with thickness 60~80 mm and uniaxial compressive strength 62 MPa. After cutting coal seams by abrasive water jet, the surface area for methane is enlarged and then coal seams pressure fell rapidly. Therefore the permeability and desorption of coal seams are greatly increased. The results are as follows: the average productivity of single-hole was enhanced by 2.83 times.