In this paper, the water model method is used to optimize the flow behavior of asymmetrical five streams L-type tundish in a steelmaking plant. The results show that the optimization plan is set up with turbulence suppressor T+ vice guide wall D2+ main guide wall with three holes (D1a) which consists of top two holes with 25° inclination and one hole with 30° inclination below. With this plan, the time which the colorants reach to the outlets increases, the difference of response time in all outlets decreases, the peak concentration of the RTD reduces, the existence time of high concentration liquid steel extends, and the ratio of dead zone in each streams reduces.