油酸铅的原位合成及摩擦学性能评价
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TE624.82

基金项目:

国家重点基础研究专项经费 (G19990 65 0 ),中国科学院兰州化物理所固体润滑国家重点实验室基金资助


In-situ Synthesis and Tribological Investigation of Lead Oleate as Oil Additive
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在200SN中原位合成了油溶性油酸铅,并用FT-IR对其进行了表征。用四球及往复式摩擦试验机对其摩擦学性能进行了评价,结果表明:油酸铅具有良好的抗磨性能、显著的减摩性能和中中等的极压性能。为弄清其抗磨减摩机理,用SEM及XPS表征了磨斑表面,表征结果发现,摩擦学性能的改善是因油酸铅在摩擦副表面形成吸附膜和在摩擦条件下部分吸附膜发生摩擦化学反应产生了铅氧化物膜所致。

    Abstract:

    Oil soluble lead oleate is synthesized in-situ in 200SN basic oil and characterized with FT-IR . Its tribological properties as friction reducing and anti-wear additives of lubricating oil are evaluated with four-ball and reciprocation tribo-tester. The results indicates that lead oleate have excellent anti-wear property, better wear-reducing efficiency and middling extreme pressure property. Wear scar surface is characterized with photoelectron spectroscopy (XPS)and scanning electron microscopy (SEM) for explaining friction reducing and anti-wear mechanism. Analytical results show that the additive could markedly improve tribological properties of 200SN basic oil by forming adsorbing film on steel-steel friction pair and part of film transforming oxidic film by means of tribochemical reaction.

    参考文献
    相似文献
    引证文献
引用本文

欧忠文 丁培道 等.油酸铅的原位合成及摩擦学性能评价[J].重庆大学学报,2002,25(10):84-88.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:2002-06-13
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码