盐稀释剂对合成D,L-丙交酯的影响
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O623

基金项目:

重庆市自然科学基金


Effect of Synthetic D,L-Lactide with PD PDiluent
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用对比实验、正交试验以及盐稀释剂量的选择确定最优合成工艺条件,对所制备的D,L-丙交酯再进行定性和定量分析.得出盐稀释剂是影响D,L-丙交酯产率最显著的因素,当用量为4%-6%时,其收率由25.65%提高到约40.00%,磷酸盐的残留量仅为0.012%,D,L-丙交酯的纯度可达99.40%以上.磷酸盐稀释剂能够显著提高D,L丙交酯的收率,不影响结构和纯度,所制得的D,L丙交酯能够满足合成聚合物和共聚物的要求.

    Abstract:

    To discuss the effect about yield of synthetic D,L-lactide with potassium dihyrogen phosphate(PDP) diluents.The optimization process of synthetic D,L-lactide was selected by contrast experiments,optimization experiments and selective experiments of PD Pdiluents quantity,then D,L-lactide produced was analyzed by qualitative analysis and quantitative analysis.The yield of D,L-lactide was improved from 25.65% to about 40.00% when PD Pdiluents that was the most effective factor to affect yield was used from 4%to 6%,however,the rudimental PD Pcontent was only 0.012% and the content of D,L-lactide was above 99.40%.The yield of D,L-lactide was improved effectively with PD Pdiluents,and the D,L-lactide,which structure wasnot changed,could be polymerized into PLA and other polymers for enough content.

    参考文献
    相似文献
    引证文献
引用本文

胡承波,陈际达,王芳,周治国,季金苟.盐稀释剂对合成D, L-丙交酯的影响[J].重庆大学学报,2007,30(5):108-112122.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:2007-01-23
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码