改进型直流侧有源电力滤波器参数设计及仿真
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50507020);重庆市自然科学基金资助项目(2005BA6017)


Parameter design and simulation for animproved direct current side active power filter
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对直流侧串联型有源电力滤波器(active power filter, APF)输出不可调压和控制电路较复杂的特性,提出一种输出可调压的改进型直流侧串联型APF拓扑。从理论上分析了改进型直流侧串联型APF电路拓扑和基本工作原理,根据电路功率因数预调节原理,给出了主电路参数设计方法。利用零极点配置法对电压环和电流环进行了设计。同时主电路功率开关采用同频率控制,进一步简化控制电路。与并联型APF相比,该拓扑简化了主电路结构,进一步减少有源开关的数量,具有输入电流谐波低、功率因数高、输出电压调节范围宽、成本低

    Abstract:

    Considering the characteristics of the dc side series active power filter (APF) that the output voltage cannot be adjusted and the control circuit is complex , an improved singlephase dc series APF topology is proposed. The improvement of the new circuit topology and fundamental working principle are analyzed. Following the circuit power factor preregulator principle, the designing method for the main circuit parameters is given. The voltage ring and the current ring are designed by using the zeropole method. The main circuit power switch is controlled with the same frequencies, while the control circuit was simplified further. Compared with the paralleled APF, the main circuit of topology structure is simplified and the number of the active switches is reduced, which show low input current harmonics, high power factor, large voltage output adjustment range and low cost. The simulation results prove that the proposed topology is correct and reliable.

    参考文献
    相似文献
    引证文献
引用本文

侯世英,嵇丽明,索丽娟,徐曦.改进型直流侧有源电力滤波器参数设计及仿真[J].重庆大学学报,2009,32(9):1065-1069.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-05-18
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码