镍铁合金矿热炉渣辅助胶凝材料的制备与性能
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50772136/E020501)


Preparation of the supplementary cementitious material offerronickel submerged arc furnace slag and its properties
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    镍铁合金矿热炉渣大量堆存,数量越来越多,已经严重影响镍行业的可持续发展。通过粉磨,镍铁合金矿热炉渣被机械活化,可用其制得辅助胶凝材料,实现了对镍铁合金矿热炉渣的综合利用。用其等质量取代水泥10%~40%,随着掺量增加,水泥标准稠度用水量逐渐降低,胶砂流动度逐渐提高;胶砂抗压强度逐渐降低,抗折强度先增加,掺量超过10%后逐渐降低,折压比逐渐升高。试验结果表明,镍铁合金矿热炉渣可以用作辅助胶凝材料,并具有提高抗折强度、增塑减水等作用。

    Abstract:

    The ferronickel submerged arc furnace slags are stored up more and more, as a result, seriously influenced the sustainable development of the nickel industry. By grinding, the ferronickel submerged arc furnace slag is mechanically activated, then can be used as supplementary cementitious material, thus a comprehensive utilization way of ferronickel submerged arc furnace slag is developed. Using such processed slag to replace cement from 10% to 40% in mass, with the increase of replacing dosage, the water demand of standard consistency of cement paste is lowered, the fluidity of mortar is raised; the compressive strength of mortar is decreased; the flexural strength is increased followed by a decrease after the dosage is above 10%, the ratio of flexural strength to compressive strength is increased. The experimental results indicate that the ferronickel submerged arc furnace slag can be used as supplementary cementitious material and has an increase of flexural strength and effect of plasticizing and water reducing.

    参考文献
    相似文献
    引证文献
引用本文

万朝均,孟立.镍铁合金矿热炉渣辅助胶凝材料的制备与性能[J].重庆大学学报,2010,33(1):119-123.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码