内混式扇形空气雾化喷嘴参数分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家“十一五”科技支撑计划项目(2006BAJ01A063)


Numerical analysis on fanshaped airblast atomizer parameters
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用EulerianLagrangian耦合算法,对内混式空气雾化喷嘴的性能参数进行了数值模拟,结果表明:气液质量流量比为定值时,随着喷嘴孔口宽度的增大,雾化角和液滴的速度逐渐减小,索特尔平均粒径(SMD)不断增大;为了获得更细小的液滴,喷嘴孔口宽度不宜过大;喷嘴孔口宽度为定值时,SMD随气液质量流量比的增加,先逐渐减小,达到极小值后,又逐渐增大,喷嘴孔口宽度为0.6 mm时,SMD的极小值约为39.5 μm。

    Abstract:

    Based on EulerianLagrangian coupling algorithm, the performance parameters of Fanshaped airblast atomizer is simulated. It is shown that when gasliquid mass flow ratio is constant, the spray angle and velocity of droplet decreases and SMD increases gradually with the increase of orifice width. Therefore, in order to obtain much smaller liquid droplet, orifice width should not be too wide. When the orifice width is constant, along with the increase of gasliquid mass flow ratio, SMD decreases firstly and increases later when reaching the minimum. And SMD minimum value is 39.5 μm when the orifice width is 0.6 mm.

    参考文献
    相似文献
    引证文献
引用本文

付祥钊,蒋斌,王勇,王子云.内混式扇形空气雾化喷嘴参数分析[J].重庆大学学报,2010,33(3):87-91.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-11-18
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: