城市垃圾制备陶粒配方及焙烧条件优化分析
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

重庆市自然科学基金资助项目(CSTC,2008BB7048)


Analysis of batch formula and optimizing calcination conditions of light-weight aggregates prepared by municipal solid waste
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以城市有机生活垃圾为原料,采用三叶回转窑烧制成陶粒,是一种有效的垃圾资源化处置方式。试验研究了以垃圾、黏土和粉煤灰为原料烧制陶粒的最佳原材料配比和最优焙烧条件,结果表明,1)烧制陶粒的最佳原材料配比(干混合比):垃圾15.38%,黏土14.85%,粉煤灰69.77%;2)最优焙烧条件:窑预热温度500 ℃,烧成温度1 190 ℃,烧成温度保持时间4 min。以最优试验方案制得的陶粒堆积密度为605 kg/m3,筒压强度为3.0 Mpa,吸水率为11.0%,软化系数为0.93,满足GB/T17431.1—1998规定的普通轻集料700级的技术要求;陶粒浸出毒性实验表明浸出液中各项重金属含量均远低于GB/T 5085.3—2007规定的浓度限值,具有环境安全性。

    Abstract:

    It is an effective technology of recycling organic fractions of municipal solid waste as light-weight aggregates (LWA) fired in trefoil rotary kiln. This paper studies the optimum batch formula and optimal calcination conditions of LWA made from municipal solid waste , clay and coal fly ash.The results indicate that: 1)optimum batch formula (dry mixture ration) is 15.38% of BMW,14.85% of clay,69.77% of coal fly ash; 2)optimal calcination conditions are preheating temperature of kiln:500 ℃, sintering temperature:1190 ℃, holding time of sintering temperature: 4 min. The performance testing indicators of aggregate fired under best experimental parameters shows: bulk density is 605 kg/m3, cylinder compressive strength is 3.0 MPa, 1hr water absorption is 11.0%, apparent density is 0.93, all of the targets meet 700 grade light aggregate of GB/17431.2—1998 standards; the results of leaching test are lower than hazardous constituents concentration limits of GB/T 5085.3—2007 standards, LWA is not hazardous to environment.

    参考文献
    相似文献
    引证文献
引用本文

黄川,姚雪燕,王里奥,黄晶.城市垃圾制备陶粒配方及焙烧条件优化分析[J].重庆大学学报,2010,33(5):139-144.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2010-01-07
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码