旁通式烟气循环流化床脱硫特性的数值模拟
作者:
基金项目:

重庆市自然科学基金重点基金项目(CSTC,2009BA6067)


Numerical simulation of desulfurization characteristics in CFB flue gas with bypass
Author:
  • 摘要
  • | |
  • 访问统计
  • | |
  • 相似文献
  • | | |
  • 文章评论
    摘要:

    应用标准k-ε模型、DPM模型和物质输运与化学反应模型模拟了烟气循环流化床内的两相流动及脱硫反应,模拟结果和实验数据吻合较好。模拟研究了2种脱硫塔的脱硫效率和流动阻力,并进一步研究了入口SO2浓度对旁通式脱硫塔脱硫效率的影响。结果表明:旁通式脱硫塔的脱硫效率和阻力特性要优于无旁路脱硫塔;旁通式脱硫塔的脱硫效率随入口SO2浓度的增加而降低;脱硫塔内湿度增加时,脱硫效率增加。

    Abstract:

    This paper uses the standard k-ε model, DPM, Species Transport and Finite-Rate Chemistry model to simulate momentum, energy and composition equations of a new CFB desulfurization tower with gas bypass. The numerical simulation results agree well with the experimental results. The characteristics of desulfurization and flow resistance of two desulfurization towers are analyzed by numerical simulation, and the influence of SO2 concentration to desulfurization efficiency of bypassing desulfurization tower is also analyzed. The results show that both desulfurization and flow resistance characteristics of bypassing desulfurization tower are better than those of non-bypassing desulfurization tower. The desulfurization efficiency of bypassing desulfurization tower decreases with the increase of SO2 concentration, the desulfurization efficiency increases with the increase of the relative humidity of bypassing desulfurization tower.

    参考文献
    相似文献
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

唐强,侯世锋,张晓琴.旁通式烟气循环流化床脱硫特性的数值模拟[J].重庆大学学报,2012,35(10):104-108.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 在线发布日期: 2012-11-08
文章二维码