三惰轮复合齿轮泵密封块瞬态径向力分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TH325

基金项目:

国家自然科学基金资助项目 ( 5 95 75 0 10 ),浙江大学流体传动与控制国家重点实验室开放基金资助项目


Analysis of Radial Forces on the Seal Block in a Compound Gear Pump with 3 Idle Gears
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过对具有3个惰轮的定轴轮系复合齿轮泵各齿轮齿顶圆与密封块间的压力分布规律的分析,求出各齿轮与密封块间的液压油对密封块产生的液压力合力。由分析结果可知,3惰轮复合齿轮泵中,作用于密封块上不平衡的液压合力较小,由于复合齿轮泵的内啮合密封较长,密封效果较好,而外啮合密封线较短,其密封性能较差,因此,少量的不平衡液压合力将密封块压向中心轮的排油腔,从而得出较小的不平衡液压合力有利于改善复合齿轮泵的密封效果等结论。

    Abstract:

    By analyzing the pressure distribution between gears and sealing blocks in compound gear pump with three idlers,the resultant hydraulic forces acting on seal blocks are obtained.The conclusion is the unbalanced resultant hydraulic forces are relatively small in magnitude.In the pump,the inner sealing edges are long and so it s Sealing effect is good,but the outer sealing effect is relatively poor because of its short sealing edges.The little unbalanced force pushes the sealing block to te pumping chamber,therefore it is advantageous to meliorating the pump's sealing effect,thereby to improving it's volumetric efficiency as well.

    参考文献
    相似文献
    引证文献
引用本文

赵连春 许贤良 等.三惰轮复合齿轮泵密封块瞬态径向力分析[J].重庆大学学报,2001,24(6):45-47.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:2001-08-14
  • 录用日期:
  • 在线发布日期:
  • 出版日期: