缝纫对复合材料层板面内单向拉伸强度的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB33

基金项目:

国家自然科学基金资助项目 ( 39970 198)


Effect of Stitching on the In-plane Tensile Strength of Stitched Composite Laminates
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    缝纫方法可以极大地增强复合材料层板的层间力学性能,与此同时也对复合材料层板的面内力学性能造成一定的损伤。作者采用理论与实验相结合的方法研究了复合材料面内拉伸强度与缝纫参数的影响,研究结果表明复合材料层板的面内拉伸强度与缝纫参数密切相关,复合材料层板的面内拉伸强度将随缝纫密度,缝纫线直径的增加而减小。作者认为这是因为缝纫过程在复合材料层板中产生的初始损伤密度随缝纫密度和缝纫直径的增加而增加所造成的。

    Abstract:

    Some additional effects of stitching on the in-plane mechanical properties of composite laminate is introduced while it was used to improve the interlaminar of plane mechanical properties of the composite laminate. The paper investigates the effect of stitching on in-plane tensile strength of composite laminates. The results show that the effect of stitching is dependent on the stitching parameters. The in-plane tensile strength of laminates is degraded with the decreasing of stitching space and step and increasing diameter of stitching thread. It is found that the initial damage of laminate increased with increasing of stitching parameters such as stitching density. This causes the decrease in the in-plane strength of composite laminate.

    参考文献
    相似文献
    引证文献
引用本文

邓传斌 李苹 等.缝纫对复合材料层板面内单向拉伸强度的影响[J].重庆大学学报,2002,25(1):9-12.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: