TiO2光催化氧化性能的影响因素
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O644.12

基金项目:

教育部春晖计划项目,,


The Influences on Photocatalyzing Properties of TiO2
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用负载型TiO2光催化剂处理含酚废水,研究光源、光照时间、废水液pH值等因素对苯酚去除率的影响,结果表明,由于紫外光所发出的光子能量大,TiO2光催化活性强,因此在处理过程中,用高压汞 太阳光照射效果好;尽管光照时间超过5h后苯酚去除率仍有所增加,但从生产工艺和经济的角度考虑,光照时间以5h为宜;TiO2光催化剂的氧化性能在酸性或碱性条件下最好,在处理含酚废水时,pH值为2.0去除率最高。

    Abstract:

    An immobilized TiO 2 photocatalyst is choosed to treat phenol dicharge. The authors study the remove efficiencies under different conditions through experiments, such as lamping lights,time that the photocatalyst is lamped,pH of phenol dicharge and so on. It is showed that a satisfactory can be presented in the condition that the photocatalyst is lamped by mercury light and the time that light lamping lasts 5 hours long and pH of phenol dicharge is in 2.0.

    参考文献
    相似文献
    引证文献
引用本文

刘仁龙 张云怀 等. TiO2光催化氧化性能的影响因素[J].重庆大学学报,2002,25(6):92-.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: