基于DSP的MP3解码系统设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TP274

基金项目:

重庆市信息产业局资助项目


MPEG Layer Ⅲ Decoder Design Based on DSP
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于DSP实现MP3解码系统的设计,采用高性能的立体声音频Codec芯片TLV320AIC23作为音频信号数模转换,DSP的两个McBSP与其连接,分别作为配置接口和音频数字接口,配置接口设置为SPI模式.USB与DSP接口实现MP3数据流与PC机之间的上传与下载,存取MP3文件方便,存储MP3文件的媒介选取大容量的存储设备CF卡,系统选用可编程逻辑器件CPLD控制USB及CF卡的读写和片选.实验证明该系统可以高质量完成MP3解码、播放.

    Abstract:

    The design of MP3 decode system based on DSP is introduced. TLV320AIC23, a high performance and stereo codec chip, is selected as a D/A converter in the system. Two McBSPs ofDSP are connected to TLV320AIC23, one of them acts as configuration interface, the other ,the audio digital interface. Configuration interfacemode is SPI. The MP3 audio bitstreamtransmissionbetween the PC and DSP isrealized through the USB1.1 interface. So it is convenientto access MP3 audio bitstream. A large capacitymemory device, Compact Flash Card , is a storage media accessing MP3 bitstream.a programmable logical device, CPLD, controls reading, writing and chip selection of USB and Compact Flash Card. Some experiments show the systemcan well accomplish MP3 decodingand playing.

    参考文献
    相似文献
    引证文献
引用本文

罗钧,付丽.基于DSP的MP3解码系统设计[J].重庆大学学报,2005,28(1):28-31.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:2004-11-05
  • 录用日期:
  • 在线发布日期:
  • 出版日期: