高频焊接设备的谐波分析与治理
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TM714.1

基金项目:

国家自然科学基金


Harmonic Analysis and Suppression of High-frequency Welding Devices
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    分析了三相交流调压电路的电路结构及其电源电流波形;建立了一个三相交流调压电路的具体应用实例--高频焊接设备的仿真模型,并对其线电流的谐波状况进行了仿真分析,仿真结果与现场谐波测试结果进行了对比分析,二者相符,说明仿真电路模型正确.针对设备的谐波状况设计了两组单调谐滤波器和一组二阶高通滤波器,对加入了LC滤波器的电路进行仿真验证,发现电源线电流的高次谐波含量大幅度减少,波形接近正弦波,这证明了谐波治理方案设计的正确性.

    Abstract:

    This paper analyzes the structure and line current waveform of 3-phase AC voltage regulation circuit. As an application of 3-phase AC voltage regulation circuit, a high-frequency welding device's simulation model and harmonic analysis of line current are presented. Results of simulation are compared to field measurements. The two are in a good agreement, so this simulation model is correct. Two single-tuning filters and one second-order HPF are designed according to the device's harmonic condition. Simulation results of the circuit with filters indicate decrease of the harmonics in current of power supply, and the waveform is close to sinusoidal wave, which prove correctness of the solution to harmonics pollution.

    参考文献
    相似文献
    引证文献
引用本文

罗胜金,杜雄,周雒维.高频焊接设备的谐波分析与治理[J].重庆大学学报,2005,28(2):26-31.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:2004-10-10
  • 录用日期:
  • 在线发布日期:
  • 出版日期: