Mg—Zn合金的热力学性质计算
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TG146.4

基金项目:

重庆市自然科学基金资助项目(CSTC,2005BA4015)


Calculation of the Thermodynamic Properties of Mg-Zn Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    组元活度的获得是合金热力学性质研究的一个重要方面.在各种预测合金热力学性质的模型中,Miedema模型是近年来发展得较为完善和准确的模型.文中根据Miedema合金生成焓模型,计算了Mg—Zn合金的生成焓,进而计算出了1000K时Mg—zn合金熔体中zn的活度曲线.计算结果表明,由于Mg—zn合金的生成焓值较小,在计算活度的过程中,过剩熵值对计算结果的影响较大,在引入过剩熵值后的活度计算值与实验值吻合较好.

    Abstract:

    Getting activity of component is an important aspect of researching the thermodynamic characters of alloy. Under each model of predicting the thermodynamics characters of alloy, Miedema model has been developing as comparatively a good and accurate model in recent years. In this work, the formation enthalpy of Mg - Zn alloy has been calculated, according to the Miedema model. Further, the activity curve of Zn in Mg - Zn alloy at 1 000 K is calculated. The calculating result is that, as the formation enthalpy of Mg - Zn alloy is small, and in the procedure of calculating activity, excess entropy attributes a lot to the result, after considering excess entropy, calculating results and experimental values match each other very well.

    参考文献
    相似文献
    引证文献
引用本文

周鸿翼 刘天模 王金星. Mg—Zn合金的热力学性质计算[J].重庆大学学报,2006,29(12):68-71.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2006-06-23
  • 最后修改日期:2006-06-23
  • 录用日期:
  • 在线发布日期:
  • 出版日期: