甲醇水蒸气重整制氢过程的优化分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

重庆市自然科学基金资助项目(CSTC2008BB3161);国家自然科学基金资助项目(50906104);国家大学生创新性实验计划资助项目(081061120);重庆大学高层次人才科研启动基金项目(2009)


Optimization analysis of methanol steam reforming for hydrogen production
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为强化甲醇水蒸气重整制氢反应过程,以出口甲醇转化率和氢气含量为目标考察了反应器中催化活性梯级分布和均匀分布对制氢效果的影响。利用计算流体力学软件FLUENT中的通用有限速率模型对反应器进行了二维数值研究。计算表明,可通过催化活性由低到高的梯级分布提高反应器出口甲醇转化率和氢气含量。与活性均匀分布相比,反应器中的冷点温差降低了10K,实验表明反应器出口H2含量提高约8.5%,CO含量降低约0.19%。

    Abstract:

    In order to intensify the process of methanol steam reforming, this paper studies the effect of equally and gradiently distributed catalytic bed on methanol conversion and H2 content at reactor outlet. With the application of general finite reaction rate model in CFD software of FLUENT,2D simulation of this process is carried out.The results show that methanol conversion and outlet H2 content can be increased through gradiently distributed catalytic bed with higher catalytic activity at inlets and lower at outlets. Compared with the equally distributed catalytic bed, the cold spot temperature difference in the microreactor reduces by 10 K, experiment results prove that H2 content at outlets increases about 8.5% and CO decreases by about 0.19%.

    参考文献
    相似文献
    引证文献
引用本文

王锋,郑世伟,张鼎纹,漆波,张翔宇.甲醇水蒸气重整制氢过程的优化分析[J].重庆大学学报,2009,32(12):1408-1413.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: