风力发电机齿轮传动系统的动态优化设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50675231);国家支撑计划项目(2006BAF01B0701)


Dynamic optimization design of gear transmission system for wind turbine
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    同时考虑时变啮合刚度、啮合误差以及风速变化引起的外载荷波动,建立了1.5 MW风力发电机齿轮传动系统的集中参数模型,并利用谐波平衡法,得到时变振动微分方程的解析解。在此基础上,建立了以各构件的振动加速度和系统体积/质量为目标函数的多目标动态优化模型,利用混合离散变量组合型法对其进行求解。计算结果表明,提出的系统建模和优化设计方法,可有效降低风电齿轮箱的振动水平和质量,为低噪声、低成本的风电齿轮箱的设计提供参考。

    Abstract:

    The differential equation which governs the behavior of the gear transmission system of 1.5 MW windturbine is established. The external excitation caused by wind speed fluctuation is discussed and the internal excitation due to timevarying mesh stiffness and comprehensive error is also analyzed. The calculating formulations of the harmonic balance method of nonlinear dynamic equations are presented. Then, the multiobjective dynamic optimization model is developed to minimize the value of vibration acceleration and the overall volume. The optimization of a practical example using mixeddiscrete combined programming is performed. The result shows that the proposed method of modeling and optimization design can effectively reduce the wind turbines gearbox vibration levels and weight.

    参考文献
    相似文献
    引证文献
引用本文

张庆伟,张博,王建宏,秦大同.风力发电机齿轮传动系统的动态优化设计[J].重庆大学学报,2010,33(3):30-35.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-10-10
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: