汽车主动悬架H2/H多目标控制线性矩阵不等式方法
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50875270);教育部重点实验室开放基金资助项目(2009KLMT05);重庆市科技项目(CSTC,2008BA6025;CSTC,2008AC6097)


Multiobjective and H2/H control of vehicle active suspension based on LMI
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用七自由度整车模型,以实现较好的平顺性和操纵稳定性为目标,选取路面垂直速度扰动到输出平顺性评价信号传递函数的H2范数为平顺性指标,路面垂直速度扰动到输出操纵稳定性评价信号传递函数的H范数为操纵稳定性指标,设计了基于LMI(linear matrix inequality线性矩阵不等式)算法的主动悬架H2/H多目标输出反馈控制器。研究结果表明,该控制器能在有效改善汽车的平顺性的同时不过分降低操纵稳定性,较好地解决了平顺性与操纵稳定性指标之间的矛盾。

    Abstract:

    A multiobjective and mixed H2/H controller based on LMI(linear matrix inequality) is developed to balance ride comfort and handling stability performance of vehicle. The multiobjective optimal control law is devised for an active suspension system of seven degreeoffreedom fullcar model. Norm H2 of the transfer function from road profile velocity disturbance to output evaluating signal is selected as the evaluating index of ride comfort performance, and norm H of the transfer function from road profile velocity disturbance to output evaluating signal is selected as the evaluating index of handing stability performance. The results from the simulation demonstrate that the controller obtains a good performance of ride comfort with the less expense of the handling stability.

    参考文献
    相似文献
    引证文献
引用本文

李以农,郑玲,罗铭刚,米林.汽车主动悬架H2/H多目标控制线性矩阵不等式方法[J].重庆大学学报,2010,33(4):1-8.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-12-20
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: