超环面弯晶在X射线单色背光成像中的应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(NSAF10976033);中央高校基本科研业务费资助项目(CDJXS11122219)


Application of toroidally curved crystal to monochromatic X-ray backlighting imaging
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于Bragg衍射理论,分析了超环面晶体分析器实现等离子体在子午和弧矢2个方向等比例放大成像的原理,采用云母作为衍射晶体,研制了对激光等离子体进行二维成像的超环面晶体分析器,其子午和弧矢曲率半径分别为290 mm和196 mm,用于衍射成像时的Bragg角度为54°。采用铬靶X射线源辐照金属网格目标,网格的网孔尺寸为200 μm×200 μm,通过超环面晶体分析器对铬靶Kα谱线的衍射,在X射线IP板上得到了网格的二维背光衍射图像,并与球面晶体分析器成像效果进行了对比。实验结果表明,与球面晶体分析器相比,超环面晶体分析器可实现在子午和弧矢2个方向等放大比的X射线背光成像,且分析器具有较高的空间分辨力,当光源尺寸为500 μm,成像放大倍数为1.86倍时,其空间分辨力达到67 μm。

    Abstract:

    The reflection type toroidally curved crystal analyzer is investigated based on the Bragg diffraction to diagnose laser plasma X-ray. The dispersive element of crystal analyzer is mica. The bent radiuses of the crystal analyzer in meridian plane and sagittal plane are 290 mm and 196 mm respectively, and the corresponding Bragg angle is 54°. The imaging experiment is carried out at the X-ray diffractometer facility by using Cr target. Two-dimensional monochromatic image of a mesh interval of 0.2 mm×0.2 mm is obtained by the toroidally curved crystal. The experimental result indicates that 2D monochromatic image with equal magnification in the meridian and sagittal planes can be obtained by using the toroidally curved crystal analyzer. Furthermore, the spatial resolution of the toroidally curved crystal analyzer achieves 67 μm when the size of the X-ray source is 500 μm and magnifying ratio is 1.86.

    参考文献
    相似文献
    引证文献
引用本文

毋玉芬,肖沙里,刘利锋,施军,钱家渝,刘慎业,韦敏习,陈伯伦.超环面弯晶在X射线单色背光成像中的应用[J].重庆大学学报,2013,36(4):99-102.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2013-05-03
  • 出版日期: