全氧高炉炼铁工艺模拟分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50704040);重庆市自然科学基金资助项目(CSTC 2009BB4197)


Simulation research on oxygen blast furnace ironmaking process
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    建立了全氧高炉工艺的系统模拟模型。该模型能够计算不同原燃料、不同操作参数下的原料消耗、熔剂消耗、渣量及其成分、各种煤气量及其成分等。模型计算结果表明:在炉身矿石金属化率为90%时,若在炉身底部吹入较多的循环煤气,热量的需求决定了完成炉身内矿石还原所需的煤气量;若在炉缸吹入较多的循环煤气,还原性气体的需求决定了完成炉身内还原所需的煤气量。在焦比固定和正常操作条件下,煤耗的计算值基本随系统输出煤气量的增加而线性增加。在焦比取为200 kg时,经计算获得的系统最低煤比为200 kg左右。

    Abstract:

    A system simulation mathematical model on oxygen blast furnace ironmaking process is established. Provided that the material composition and the values of necessary process parameters are given, the model can predict the consumptions of raw material, fuel and flux, the quantity and composition of slag, the quantities and components of all kinds of gases, etc. At the condition of 90% stack ore metallization, the calculated results of the model show that when more circulating gas are introduced into the stack, the heat controls the total gas for the stack ore reduction, while when more circulating gas are introduced into the hearth, the reductive components control the total gas for the stack ore reduction. At normal operations with coke rate fixed, the coal consumption linearly increases with the output top gas. When the coke rate is fixed at 200 kg, the minimum value of calculated coal rate is 200 kg or so.

    参考文献
    相似文献
    引证文献
引用本文

王成善,时艳文,李丹丹,杨亚洲,穆小静.全氧高炉炼铁工艺模拟分析[J].重庆大学学报,2014,37(9):47-58.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2014-08-20
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-12-29
  • 出版日期: