考虑空间坐标转换的风电机组载荷建模与分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家国际科技合作项目(2010DFB60700)。


Load modling and analysis of wind turbine under consideringthe space coordinate transformation
Author:
Affiliation:

Fund Project:

Supported by International Scientific and Techoloqical Coorperation Project of China(2010DFB60700).

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    根据坐标转换及力学分析,推导风电机组叶根坐标系和风轮坐标系之间的载荷传递关系,建立更接近实际工况的载荷分析模型。文章以某5 MW风电机组为分析对象,对新分析模型、简化模型和GH Bladed模型进行结果对比,验证该分析模型具有更高的可靠性和精确性;根据机组载荷组成,通过获取坐标转化过程中各组成因素的实例数据,对各组成因素的影响程度进行精确分析,对控制及降低载荷具有重要意义。

    Abstract:

    Based on coordinate transformation and mechanical analysis, load transformation between blade root and rotor coordinate system for wind turbine is derived.And an analysis model closer to actual working condition is established.Taking a 5 MW wind turbine as analysis object, analyzing results of the new model, traditional simplified model and GH Bladed model are compared, and results are good enough to validate this new model has higher reliability and accuracy.In addition, based on analyzing to load component, through access to instance data of each factor in process of coordinate transformation, the impact of each factor can be accurately analyzed, which is of great significance to control and reduce load.

    参考文献
    相似文献
    引证文献
引用本文

韩花丽,陶友传,文茂诗,徐向阳.考虑空间坐标转换的风电机组载荷建模与分析[J].重庆大学学报,2015,38(1):20-26.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2014-11-20
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-03-03
  • 出版日期: