风电主齿轮箱动态响应分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技支撑计划资助项目(2012BAA01B05)。


Dynamic analysis of wind turbine gearbox
Author:
Affiliation:

Fund Project:

Supported by National Key Technology Support Program(2012BAA01B05).

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以某3 MW风电齿轮箱为研究对象,通过导入壳体、齿圈、转架有限元凝聚刚度矩阵,建立基于MASTA的多柔体动力学模型,分析发现箱体在三级齿轮啮合频率附近有最高的动能分布,齿轮箱在高速级齿轮第一阶啮合频率激励下有最大的振动响应,且计算结果和试验测试结果基本符合。该结果可对风电齿轮箱设计阶段进行振动风险规避提供一定计算参考。

    Abstract:

    By inputting reduced matrix of stiffness and mass, a dynamic model including flexible housing, ring gear and carrier for a 3 MW wind turbine gearbox is established based on MASTA. And analysis results show that the kinetic percentage of housing is maximum near the gear mesh frequency and response is maximum at the 1st mesh frequency of HSS gear. The analysis results show certain agreement with vibration test results. This paper can provide reference for avoiding vibration in gearbox design.

    参考文献
    相似文献
    引证文献
引用本文

孙中奎,孙义忠,何爱民,王少丽.风电主齿轮箱动态响应分析[J].重庆大学学报,2015,38(1):103-109.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2014-11-10
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-03-03
  • 出版日期: