CaO-B2O3-SiO2-TiO2系保护渣配位结构的计算模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Computational simulation on the coordination structure of CaO-B2O3-SiO2-TiO2 mold fluxes system
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对新型无氟保护渣CaO-B2O3-SiO2-TiO2四元渣系,采用分子动力学模拟的方法,对该保护渣系的微观结构进行了模拟计算,分析了CaO-B2O3-SiO2-TiO2渣系的配位结构,并考察了TiO2含量对保护渣配位结构的影响规律。研究表明:该渣系中硼的配位结构只存在三配位的三角体和四配位的四面体,而Ti与O之间主要以六配位的八面体结构形式存在;随着TiO2含量的增加,保护渣微观结构中Si、B、Ti的配位形式将发生明显变化,分别向四配位结构、三配位结构及五配位结构转化。

    Abstract:

    The coordination structure of the quaternary mold fluxes CaO-B2O3-SiO2-TiO2 is invested by means of molecular dynamics simulation, and then the regularity of the changes for the variety of TiO2 content is concluded. The results show that there are only three-coordinate triangular body and four-coordinated tetrahedron of boron, and it is mainly the form of six-coordinated octahedral between Ti and O in the slag. With the increasing of TiO2 content, microstructure ligands form of Si, B and Ti will change significantly, converting to the direction of four-coordinate structure, three-coordinate structure and five-coordinate structure respectively.

    参考文献
    相似文献
    引证文献
引用本文

梁小平,陆东旭,王雨,吴建清. CaO-B2O3-SiO2-TiO2系保护渣配位结构的计算模拟[J].重庆大学学报,2015,38(5):135-141.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2015-02-05
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-04
  • 出版日期: