基于OH-PLIF技术的合成气燃烧速度
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

重庆市重点产业共性关键技术创新专项 (CSTC2016zdcy-ztzx20001)。


Study on the laminar burning velocity of syngas based on OH-PLIF technology
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了解合成气燃烧特性,采用高精度光学测量技术PLIF,研究了不同生物质气化合成气在不同当量比下的燃烧火焰结构、OH基浓度以及火焰传播速度。采用CHEMKIN软件模拟计算了相同工况下合成气火焰传播速度,对引起温度变化和OH基浓度变化的原因进行了化学动力学分析。研究结果表明,合成气中CO含量的增加会使火焰整体结构变小,但对内焰影响程度不大,而H2含量的增加会增大火焰的传播速度。合成气燃烧过程中主要影响OH基生成的是R36:CO+OH=CO2+H、R43:H+O2+M=HO2+M和R45:H+HO2=2OH这3个基元反应。

    Abstract:

    In order to understand the combustion characteristics of the syngas, an experiment was conducted to research the structure, distribution of OH radicals and burning velocity of the syngas-air with OH-PLIF technology. Simulations were also conducted to analyze the chemical kinetics of the combustion process. The results show that the increasing fraction of CO will shrink the structure of the flame, while the height of inner flame varies a little. However, the increasing of H2 will increase the burning velocity dramatically. The dominant reactions on the formation of OH radical are R36:CO+OH=CO2+H, R43:H+O2+M=HO2+M and R45:H+HO2=2OH.

    参考文献
    相似文献
    引证文献
引用本文

蒲舸,张勋,王文鼎.基于OH-PLIF技术的合成气燃烧速度[J].重庆大学学报,2017,40(5):29-35.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-12-15
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-06-03
  • 出版日期: