无机-有机杂化材料催化合成乙酸异戊酯及动力学研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

浙江省新苗人才计划资助项目(2016R436010)。


Catalytic synthesis of isoamyl acetate by amino acid functional heteropolyacid as catalysts and its kinetics
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以甘氨酸(Gly)和磷钨酸为原料合成的一系列无机有机杂化材料为催化剂,考察各因素对其催化合成乙酸异戊酯的影响,并利用响应面分析法优化乙酸异戊酯合成工艺。研究表明,[GlyH]1.0-H2.0PW12O40催化剂具有最高的催化酯化反应活性和重复使用性能。响应面分析法优化乙酸异戊酯合成的最佳条件为:醇酸摩尔数比为1.05:1,催化剂用量为酸质量的4.5%,反应时间2.0 h,带水剂量10 mL,该条件下,乙酸异戊酯产率为98.5%,结果与模型预测值基本相符。优化条件下[GlyH]1.0H2.0PW12O40催化酯化反应表观活化能为79.73 kJ/mol。

    Abstract:

    The organic-inorganic hybrid catalyst,namely[GlyH]xH3-xPW12O40(x=1.0-3.0),was prepared by combining phosphotungstic acid and glycine (Gly).The effects of various factors on the catalytic synthesis of isoamyl acetate with using[GlyH]xH3-xPW12O40(x=1.0-3.0) as catalysts were studied,and the synthesis process of isoamyl acetate was optimized by response surface methodology (RSM).The results show that[GlyH]1.0-H2.0PW12O40 catalyst has the highest catalytic esterification reactivity and reusability.The optimum conditions are n(isoamylol):n(acetic acid)=1.05:1,the amount of catalyst to acetic acid 4.5%,reaction time 2.0 h and water-carrying agent 10 mL.Under these conditions,the yield of isoamyl acetate reaches 98.5%,which is in basic agreement with values predicted by the mathematical model.Under the optimal conditions,the active energy of the esterification is 79.73 kJ/mol.

    参考文献
    相似文献
    引证文献
引用本文

梁娟娟,赵宇钱,李芳浩,韩晓祥,方苗利.无机-有机杂化材料催化合成乙酸异戊酯及动力学研究[J].重庆大学学报,2017,40(6):86-94.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-01-08
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-06-29
  • 出版日期: