竹皮轴压箱形构件整体稳定性能试验研究
作者:
中图分类号:

G642.423

基金项目:

重庆大学大学生科研训练计划项目(201910611100)


Experimental study on the overall stability of bamboo- skin axial compression box member
Author:
  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [11]
  • |
  • 相似文献 [20]
  • | | |
  • 文章评论
    摘要:

    基于114个竹皮箱形截面柱进行了轴心受压试验,研究了0.35 mm与0.5 mm两种厚度规格竹皮制作的等边箱形截面柱在不同宽厚比下的整体稳定性能。基于试验结果,分析了竹皮箱形截面柱的失稳破坏形态和整体稳定系数。试验结果表明,箱形截面构件在受荷时同时存在局部失稳与整体弯曲失稳,其中,长细比小于临界长细比的构件在受压时以局部失稳为主,长细比大于临界长细比的构件以整体失稳为主。通过对试验数据分析拟合,计算了两种规格竹皮各3种宽厚比箱形截面构件的临界长细比值,提出了竹皮轴压箱形构件柱子曲线与承载力设计方法,为学生在结构设计竞赛中进行构件截面设计提供科学的理论依据和计算公式。

    Abstract:

    Axial compression test is carried out based on 114 bamboo skin box-section columns, and the overall stability performance of equilateral box-section columns made of bamboo skins with 0.35mm and 0.5mm thickness specifications under different width-to-thickness ratios is studied. Based on the test results, the instability failure form and the overall stability coefficient of the bamboo skin box-section column are analyzed. The test results show that when the box-section member is loaded, there are both local instability and overall bending instability. Among the members with a slenderness ratio less than the critical slenderness ratio, local instability is the main component under compression, and overall instability is dominant in the members with a slenderness ratio greater than critical slenderness ratio. By analyzing and fitting the test data, the critical slenderness ratios of the box sections with three width and thickness ratios of two types of bamboo skins are calculated, and the design method of the column curve and bearing capacity of the box members with axial compression of bamboo skins is proposed, which provides scientific theoretical basis and calculation formula for the section design of members in the structural design competition.

    参考文献
    [1] 陈俊岭, 黄皇. 结构模型竞赛在土木工程专业大学生创新能力培养中的作用[J]. 高等建筑教育, 2014, 23(2):103-107.
    [2] 熊沩, 陈云, 姜宝石. 大学生结构设计竞赛对学生能力培养的探讨[J]. 高等建筑教育, 2015, 24(6):137-140.
    [3] 常海林, 张旭钦, 钱格军, 等. 大学生结构设计大赛材料力学性能试验研究[J]. 高等建筑教育, 2017, 26(5):108-114.
    [4] 雷鸣宇, 蒲万丽, 廖益林, 等. 竹皮材料综合力学性能探究[J]. 工业技术创新, 2016, 03(5):949-952.
    [5] 付善春, 尹祖兴, 杨倩文, 等. 竹材构件材料力学性能及承载力研究[J]. 河南工程学院学报(自然科学版), 2017, 29(4):49-52,82.
    [6] 贾新聪. 结构竞赛模型材料物理力学性能及模型设计制作研究[D]. 华北水利水电大学, 2018.
    [7] 马宏亮, 韩伊彤, 于景东, 等. 建筑结构模型设计中的选型与设计——以2014年辽宁省大学生结构设计大赛赛题为例[J]. 科技创新与应用, 2015(8):172.
    [8] 刁泽民, 陈富廉, 李宏涛, 等. 结构设计大赛中的计算机仿真分析[J]. 电脑知识与技术, 2017, 13(8):207-208,248.
    [9] 邹翼, 王庆, 程玉珍, 等. 竹皮结构设计与制作分析[J]. 高等建筑教育, 2018, 27(4):73-81.
    [10] 侯鹏程, 李悦, 杜修力. 关于我院结构设计大赛组织工作的几点思考[C]//高等学校土木工程专业建设的研究与实践——第十届全国高校土木工程学院(系)院长(主任)工作研讨会论文集. 长沙, 2010:331-333.
    [11] 乔朋, 李悦, 马乾瑛. 大学生结构设计竞赛对结构力学课程教学的启示[J]. 高等建筑教育, 2019, 28(5):74-79.
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

聂诗东,张辉,李静尧,陈志.竹皮轴压箱形构件整体稳定性能试验研究[J].高等建筑教育,2022,31(1):163-170.

复制
分享
文章指标
  • 点击次数:380
  • 下载次数: 724
  • HTML阅读次数: 741
  • 引用次数: 0
历史
  • 最后修改日期:2020-07-20
  • 在线发布日期: 2022-02-21
文章二维码