Volume 15,Issue 4,1992 Table of Contents

  • Display Type:
  • Text List
  • Abstract List
  • 1  ALYSTS OF THREE-FLUID SEPARATE TYPE HEAT PIPE EXCHANGER
    Shi Chengming Xin Mingdao Chen Yuanguo
    1992, 15(4):15-20.
    [Abstract](627) [HTML](0) [PDF 260.66 K](173)
    Abstract:
    An analytical model for the separate type heat pipe exchanger with three different fluids is presented. A univeral basic temperature transfer matrix equation can be applied to predict the heat transfer performance of parallel-or counter-flow in which heat is transfered between one hot fluid and two cold fluids or between two hot fluids and one cold fluid. The calculation of a real engineering example proves the proposal model to be reliable.
    2  A MIMD PARALLEL ALGORITHM TO SOLVE TRIDIAGONAL TOEPLITZ LINEAR EQUATIONS
    Chen Siqing Chen Tinghuai Zhou Liuding
    1992, 15(4):21-25.
    [Abstract](674) [HTML](0) [PDF 203.58 K](202)
    Abstract:
    The rank one updating formula and the parallel eliminating algorithm for linear recurrence systems ane combined fo form a MTMD parallel algorithm fo solve tridiagonal Toeplitz Cinear equations. This algorithm has a simple strictire and requires onlty a few storages as well as in-terprocessor communications. There is no special demand on the number of processors in the parallel system. The speedup can come dose to p12 comparing with the LU decomposition method (p is the number of processors). It is worth pointing out that it is proposed algcmthn that considels and organizes the parallel arithmetic in the first order linear ricurrence systems with constant coefficients.
    3  STUDY ON SELF -SCANNING CIRCUIT OF LOW POWER DISSIPATION MOS IMAGE SENSOR
    Wen Zhiyu Huang Youshu Yuan Xianghui He Qingyi
    1992, 15(4):26-30.
    [Abstract](586) [HTML](0) [PDF 231.61 K](195)
    Abstract:
    The paper studies a self- scanned circuit used in MOS image sensor with the demand of developing of high -order.low power disspation MOS image sensor and puts forward a kind of self -scanned circuit .which uses a three tramister dynamic nocomparing circuit whith a changing capacitor bootstrap circuit as MOS image sensor. The circuit adopted a silicon gote P -MOS technique, which is a high -speed low-dissipation dynamic no-coparing circuit. It is a practical unit circuit in the high -order array and solves the problem that the power dissipation of array rises with the increase of the array bite.
    4  THE DYNAMIC MODEL AND OPTIMIZATION OF A NEW DYNAMIC VIBRATION ABSORBER
    Ou Qiankun Tang Yike
    1992, 15(4):31-35.
    [Abstract](545) [HTML](0) [PDF 213.68 K](176)
    Abstract:
    A method of forming the broadband dynamic absorber by paralleling two absorbers is proposed in view of the characteristics of the narrow suppression range of the traditional absorber. The formation of its dynamic model and optimization are studied as well.
    5  AUTOMATICALLY NUMERICAL CONTROL PROGRAMMING BASED ON GROUP TECHNOLOGY
    Yang Wenquan Hu Zhenglin Xu Xiangsui
    1992, 15(4):42-47.
    [Abstract](651) [HTML](0) [PDF 291.76 K](230)
    Abstract:
    The structure and features of the CDGTNCP system are described with a design scheme for it to form standard NC subroutines stepwise and assemble final complete NC processing program. By means of file conveyance the integration of GTNCP with CD-CAD system has been implemented . This system adopts the figure-points description to describe componts data ,so that the step description and input of components data are carried out .
    6  AN APPRONTMATE CALCULATING METHOD FOR WALL PLATES OF MAN'''' S DRY GAS HOLDERS
    You lihua Wu Huibi Sun Renbo Wang Daivu
    1992, 15(4):48-53.
    [Abstract](734) [HTML](0) [PDF 223.30 K](173)
    Abstract:
    The basic equations of wall plates of MAN' S dry gas holders are derived in this paper. According to the law of cylindrical bending given by the finite element results .we derive some approximate formula calculating the deflection and stresses of the wall plates from the basic equations. Compared with the known approximate calculating method.the method car. obviously increase the percision.
    7  THE EXISTING-FORM DISTRIBUTION OF THE HEAVY MERTAES IN CHONGQING LIFE GARBAGES
    Lei Qingru Qin Changhua Yang Wenjun
    1992, 15(4):68.
    [Abstract](594) [HTML](0) [PDF 252.26 K](751)
    Abstract:
    The Existing-form distribution of the seven heavy metals (Cn,Zn ,Pb , Cd .Fe Mn , Ni)in Chongqing life garbages are studed with the tessier' s form group classification and continuous extnaction methods ,Each element's existing-form regularity and moving characteristic are discussed,
    8  THE ERRECT OF HIGH HARMONICS ON THE SELECTION OF THE SIZE OF TRANSFORMER CONDUCTOR
    Wu Zhiqiang Zeng Xiangren
    1992, 15(4):73-79.
    [Abstract](712) [HTML](0) [PDF 274.41 K](962)
    Abstract:
    This paper analyses the additional stray losses of transformer winding caused by harmonics,and suggests that the influence of harmonics should be taken into consideration in the selection of the conductor' s size in rectifier transformer and converter transformer design.
    9  A MULTI -OBJECTIVE FUZZY DECISION -MAKING APPROACH FOR POWER NETWORK PLANNING UNDER UNCERTAINTY
    Sun Hongbo Xu Guoyu Qin Yihong
    1992, 15(4):80-86.
    [Abstract](648) [HTML](0) [PDF 300.74 K](963)
    Abstract:
    This paper proposes a multi - objective fuzzy decision - making approach for power network planning under uncertainty ,which simutaneously considers not only the least investment cost,the minimum power loss,the maximum reliability,and the least environmental impacts, but also the uncertainty about the future load growth and the capital investment availability. The validity and effectiveness of the proposed approach is verified with numerical examples.
    10  A NER METHOD OF EXTRACTING FAULT SUPERPOSED COMPONENTS FROM CONSEQUENT TRANSIENT PROESS
    Xiong Xiaofu Ye Yilin
    1992, 15(4):87-92.
    [Abstract](650) [HTML](0) [PDF 274.06 K](1063)
    Abstract:
    This paper propsese a new method of getting fault superposed components,with which the high speed ralays can act correctly in the consequent transient process. Digital simul ations have proved the existent problem with the normal method and the correctness of the new proposed method.
    11  A CATASTROPHE ANALYSIS OF THREE -POINT BEND ROUND BEAM SPECIMENS OF ROCK
    Wang Qizhi Xian Xuefu
    1992, 15(4):93-99.
    [Abstract](636) [HTML](0) [PDF 291.11 K](1246)
    Abstract:
    The snap-back instability (also known as catastrophe behavior) .which may happen during the process of fracture testing with three-point bend round beam of rock .concrete and ceramic materials is analysed,an instability criterion for this kind of specimen is propoesd.it is different from that of the three-point bend rectangular beam.
    12  THE DEVELOPMENT OF ALUMINIUM MATRIX MICRO -GLASSBALL COMPOSITE AND THE ANALYSIS ON ITS FORMING MECHANISMS
    He Zongyan Fan Jinghong
    1992, 15(4):100-105.
    [Abstract](424) [HTML](0) [PDF 347.41 K](1206)
    Abstract:
    The problem that the micro-glassball is not wettable in molten aluminium alloys can be solved by a special technology that is different from rheocasting and squeezecasting methods. The metten metal can fill the cavity of the glass ball through the broken place on its wall, and an original micro -structure will be formed. This material has good comprehensive mechanical proper ties and this method can be used to other kinds of ceramic powders. The mechanisms of the formation of this materials have been discussed as well.
    13  THE COMPARISON OF TWO METHODS FOR LOAD EXPRESSION IN PRODUCTION SIMULATION
    Zhang Zongyi Xu Guoyu Yang Xiutai
    1992, 15(4):106-110.
    [Abstract](384) [HTML](0) [PDF 209.16 K](904)
    Abstract:
    Two methods for load expression in production simulation are studied,and the errors are analyzed and compared when the two methods are used in the direct method of probabilistic production simulation.
    14  THE INDUSTRIAL ORGANIZATIONS AND THE L-S-BUSINESS STRATEGIES
    He Zonglu
    1992, 15(4):111-117.
    [Abstract](639) [HTML](0) [PDF 354.82 K](1022)
    Abstract:
    This papar presents an evolution model in business behaviors-the L-S Business Strategies,gives some examples and predictions which support these strategies,and analyzes the relationship between the industrial organizations in China and the L-S Business strategies.
    15  THE IMPORTANT PROPERTIES OF MEAN SQUARED ERROR OF RIDGE REGRESSION ESTIMATOR AND IT''''S APPLICATIONS
    He Zhongshi He Liangcai
    1992, 15(4):118-127.
    [Abstract](2077) [HTML](0) [PDF 296.83 K](2083)
    Abstract:
    通过深入分析单参数岭估计β(k)的均方误差MSE(β(k),得到了它的一个重要特性。并把较优均方误差的存在范围由(0,σ∧2/maxa∧2γ)扩大到(0.2σ∧2/maxa∧2γ);同时,还得到了较优均方误差的另一不可替代的存在范围(0,2σ∧2minλγ/(maxλγα∧2γ-σ∧2);以及最优均方误差的存在范围[σ∧2/maxα∧2γ,σ∧2/minα∧2γ],并结合实际问题,给出了岭参数k值选的算法实例。
    16  A STUDY ON FIGURE FIELD
    Wang Huixia Sun Zequan
    1992, 15(4):128-134.
    [Abstract](631) [HTML](0) [PDF 304.12 K](963)
    Abstract:
    提出了由实际事物表象显现出来的事物系统个数-数的量,和由事物内涵表现出来的事物系统状态-数的质所共同表达的数结构模型-数字场及其数学表达形式:C=J※;绘制了意在描述数字场结构的“系统元图”,并例举了数字场量计算实例。
    17  THE DEVELOPMENT OF ANALYSIS PACKAGE MASl. 0
    Yang Wanan Xu Mingtao
    1992, 15(4):135-139.
    [Abstract](676) [HTML](0) [PDF 269.44 K](1160)
    Abstract:
    A modal analysis package specially designed for substituting modal analysis equipments is introduced with an example of application. This package runs on the IBM microcomputer and it' s compitable computers. The total cost of this analysis system is low and it is completely in Chinese.

    Current Issue


    Volume , No.

    Table of Contents

    Archive

    Volume

    Issue

    Most Read

    Most Cited

    Most Downloaded