Volume 32,Issue 1,2009 Table of Contents

  • Display Type:
  • Text List
  • Abstract List
  • 1  Numerical simulation of contact problems in high pressure reciprocating pump systems
    TANG Qian GAO Zhan ZHU Caicao XU Jie
    2009, 32(1):1-5. DOI: 10.11835/j.issn.1000-582X.2009.01.001
    [Abstract](1275) [HTML](0) [PDF 1.84 M](1334)
    Abstract:
    The cylinder bodies of reciprocating pumps easily fail from cracks due to complex external loads. Based on the working principle of reciprocating pumps, hydrodynamics, and a numerical method for surfacetosurface contact problems, a contact model involving a cylinder body, a valve base, and a valve pocket is established. Considering pressure fluctuation, flow pulsation, alternate loads, and the impact of the inlet and outlet valves, a finite element model for the complete system is established. Using this model, the contact state of the complete system is analyzed, and the stress distribution, contact state, contact stress distribution of the interface, and position of the weak part are obtained.
    2  Dynamic characteristic analysis of an allterrain vehicle body
    XU Zhongming  GUO Shifeng ZHANG Zhifei MU Xiaojing WANG Xianguo
    2009, 32(1):6-10. DOI: 10.11835/j.issn.1000-582X.2009.01.002
    [Abstract](946) [HTML](0) [PDF 1.16 M](950)
    Abstract:
    The body is a key part of allterrain vehicles (ATV). Its dynamic characteristics greatly effect the vibration of the ATV assembly. Simulation and experimental methods are combined to analyze ATV body vibration characteristics. A computer aided design(CAD) model is built using UG4.0. A finite element method(FEM) model of an ATV body and a body with an engine are created using Hypermesh. The FEM model is imported to Msc.Nastran to calculate the free mode. The simulation model is verified by the experimental modal result. The results indicate that after the frame with engine, the first bending mode increases due to the engine increasing the body stiffness, while the first torsion mode decreases due to the engine mass. The effects on the dynamic response of the road and engine excitation are analyzed respectively. Vibration characteristic improvement methods and suggestions regarding the body are provided.
    3  Research and development of a testingcontrol system for a heavy duty vehicle automatic mechanical transmission test bench
    QIN Datong ZHANG Zhilong YE Ming
    2009, 32(1):11-16. DOI: 10.11835/j.issn.1000-582X.2009.01.003
    [Abstract](896) [HTML](0) [PDF 1.89 M](1058)
    Abstract:
    Automatic mechanical transmissions (AMT) are suitable for use in heavy duty vehicles. Bench testing is an important task of the research and development. Many objectives, such as AMT performance testing, matching AMTs with engines, and optimizing control rules, can be achieved through bench testing, thereby laying a foundation for AMT application. An AMT testing bench is built up based on a developed AMT. By analyzing the performance requirements of AMT bench testing for heavy duty vehicles, a testingcontrolling system scheme is proposed and methods of data acquisition and communication are analyzed. Control methods for actuators are proposed based on analyzing the characteristics of AMT actuators. A testingcontrol program for AMT bench testing is developed based on the Delphi platform. The entire bench testing system possesses advances test functions.
    4  Quantitative evaluation of allterrain vehicle mobile platform vibration
    LI Chuanbing YU Feng LEI Yingfeng ZHANG Zhifei YANG Liang
    2009, 32(1):17-20. DOI: 10.11835/j.issn.1000-582X.2009.01.004
    [Abstract](761) [HTML](0) [PDF 1000.33 K](1296)
    Abstract:
    The vibration of the cab of the allterrain vehicle (ATV) mobile platform greatly influences driver comfort and equipment stability. A method for quantitatively evaluating vibration of the ATV mobile platform and its cab is established based on the ISO2631 and ISO5349 criteria. The method is used to evaluate the vibration of the contrast and prototype ATV mobile platforms subjected to road tests. The test results show that the contrast vehicle was superior to the prototype vehicle in several ways, including cab vibration, driver comfort, platform vibration, and proper equipment use. Analysis of the differences may guide ATV development.
    5  Numerical analysis of the spherical surface piezoelectricity ceramics extracorporeal shock wave lithotripsy launch
    WEI Chunxia ZHANG Yongxiang ZHANG Xiaoyan CHEN Jingqiu
    2009, 32(1):21-26. DOI: 10.11835/j.issn.1000-582X.2009.01.005
    [Abstract](962) [HTML](0) [PDF 2.35 M](895)
    Abstract:
    We calculate a few numerical solutions of the focusing question related to different flare angle spherical surface piezoelectric ceramics ESWL shockwaves. To do so, we first calculate the actual dynamic focus of spherical surface shock waves near the center of a sphere launched by the spherical surface piezoelectricity ceramics (ESWL) by using a discrete form of the ChisnellChesterWhitham(CCW) beam method. The numerical results show a focusing characteristic of the shock waves near the spherical surface piezoelectricity ceramics EWSL's geometric center, namely near the center of a sphere. The actual dynamic focus is not the center of the sphere but was somewhat offset. The focusing energy and the pressure ratio in the axis increase as the angles increase.
    6  Applicable range of fiber columnbeam element in analysis of specially shaped columns
    HUANG Zongming WANG Yufang  CHEN Mingdi YANG Pu
    2009, 32(1):27-30. DOI: 10.11835/j.issn.1000-582X.2009.01.006
    [Abstract](862) [HTML](0) [PDF 2.19 M](1712)
    Abstract:
    The span ratio and the ratio of section height to section thickness of column leg are selected, which mainly influence the shear effect of specialshaped columns. Based on error analysis of the displacement at the tip of the columns, the flexibility of a fiber model for Lshaped columns, Tshaped columns, and crossshaped columns in the range of elasticity is studied. The columns are studied with and without shear effect. The correctness of the fiber model with the shear effect is shown, and the applicable range of the fiber model with the shear effect is presented.
    7  Generalized conforming quadrilateral membrane element with vertex rotational freedom
    CHEN Zhaohui GUO Yi JIANG Rui GUAN Qianqian
    2009, 32(1):31-36. DOI: 10.11835/j.issn.1000-582X.2009.01.007
    [Abstract](843) [HTML](0) [PDF 1.51 M](186)
    Abstract:
    A new generalized conforming quadrilateral membrane element is developed by introducing additional rigid vertex rotational freedoms to the normal 4node quadrilateral membrane element. The rotational stiffness of the present element is not zero so that the singularity of the stiffness matrix is avoided. Numerical analysis of the Cook problem cantilever beam shows that the EAE/Mem element passes the patch test and possesses good convergence, reliability, and precision without a zero energy mode. It provides a lockfree solution to the MacNeal beam problem. Numerical results also show that the EAE/Mem element is insensitive to mesh distortion. The results demonstrate that the generalized conforming technique is an efficient tool for developing high performance finite element models.
    8  An improved method for and error evaluation of modal pushover analysis
    YANG Hong ZANG Dengke WEN Qiguang WANG Zhijun
    2009, 32(1):37-43. DOI: 10.11835/j.issn.1000-582X.2009.01.008
    [Abstract](795) [HTML](0) [PDF 2.76 M](206)
    Abstract:
    Based on evaluation of the basic principle and error of the modal pushover analysis method, an improved method is suggested by selecting rational values of stiffness reduction parameters of beams and columns in a reinforced concrete frame corresponding to the global target displacement ductility ratio. A 10story and a 16story reinforced concrete plane frame are designed as examples to investigate the influence of higher modes. Nonlinear seismic responses of the two frames under excitations of seven earthquake waves of varying earthquake intensities are selected to be the reference points for a comparison study. The changing rules of the results of modal pushover analysis and modified modal pushover analysis with respect to various natural fundamental periods and different earthquake intensities are studied. Research results show that the error of modal pushover analysis and modified modal pushover analysis will not increase with a larger fundamental period, which implies that modal pushover analysis can cover the effect of higher modes reasonably. When the degree of nonlinearity of the structure is more severe, the modified modal pushover analysis we suggest could decrease the error of normal modal pushover analysis to a certain extent.
    9  Reproducing kernel particle method for numerical analysis of Mindlin plate bending on a Winkler foundation
    ZENG Xiangyong ZHU Aijun DENG Anfu
    2009, 32(1):44-49. DOI: 10.11835/j.issn.1000-582X.2009.01.009
    [Abstract](945) [HTML](0) [PDF 2.19 M](205)
    Abstract:
    The reproducing kernel particle method (RKPM) is a typical meshless method based on kernel function simulation. Based on the interpolating shape function of RKPM and Mindlin plate theory, the governing equations of RKPM to the deflection solution of Mindlin plate bending on a Winkler elastic soil foundation are established. Numerical results indicate that the above method and the corresponding program are effective and accurate.
    10  Behavior of dendriform connections of concretefilled steel rectangular tubes
    LIU Dong GAN Zhengli ZHAO Shixing LI Zhengliang
    2009, 32(1):50-54. DOI: 10.11835/j.issn.1000-582X.2009.01.010
    [Abstract](768) [HTML](0) [PDF 3.87 M](272)
    Abstract:
    Dendriform connections of concrete filled steel rectangular tubes (CFSRT) are composed of a bifurcated column and doublecruciform beamcolumn connections. A 3D nonlinear finite element analysis (FEA) which considers all nonlinear effects of materials, geometry and contact interfaces is established. Analysis of the FEA results show that the loaddisplacement curves at the ends of the beam and hysteretic curves obtained experimentally and via FEA agreed with each other. The stiffener transfers the tensioncompression stress efficiently, the middle hole has little influence on the stress transfer, and the compressive zone of the core concrete under repeated loading has a greater contribution to the compression stress transfer.
    11  Simulation of compatibility torsion experiments of a spandrel beam in a longspan prestressed concrete secondary beams floor system
    HUANG Yin HE Zhenkun BAI Shaoliang WANG Zhenglin
    2009, 32(1):55-60. DOI: 10.11835/j.issn.1000-582X.2009.01.011
    [Abstract](938) [HTML](0) [PDF 3.40 M](232)
    Abstract:
    Multiform simulations of 4 specimens compatibility torsion experiments of a spandrel beam in a longspan prestressed concredt (P.C.) secondary beams floor system are introduced. The results of different simulation methods, such as crack loading, ultimate loading, the torque, twist and torsional stiffness of spandrel beams, are compared and analyzed. The main conclusions are as follows: The compatibility torque of a spandrel beam continuously increases with the load in all the process; The torque does not decrease obviously after cracking; The cracking torque value given by the American Concrete Institute (ACI) Code 31805 is much smaller than the ultimate torque; The reduction parameter of the torsion stiffness in a spandrel beam after cracking equals 0.05~0.10 for a longspan P.C. secondary beams floor system without monolithic slabs, and 0.10~0.40 with monolithic slabs.
    12  Antisliding pile performance under acidstresscoupling
    CHEN Hongkai  YI Liyun XIAN Xuefu TANG Hongmei 
    2009, 32(1):61-66. DOI: 10.11835/j.issn.1000-582X.2009.01.012
    [Abstract](558) [HTML](0) [PDF 1.10 M](179)
    Abstract:
    Antisliding piles are an important engineering structure used extensively in landslide prevention. Their durability influences their work lives. In a laboratory model experiment of a cantilevered antisliding pile under acidstress coupling, the pile body displacement variation is monitored continuously, and both concrete strength and neutralization depth are tested. The results indicate that the concrete strength decreases gradually under acidstress coupling, while the displacement increases continuously. The neutralization depth of the concrete in the antisliding pile is linear to the square of duration in acidstress coupling.
    13  Molecular dynamics simulation of the melting points of Au Nanaclusters
    ZHAO Liangju LI Bing GAO Hong LI Desheng
    2009, 32(1):67-70. DOI: 10.11835/j.issn.1000-582X.2009.01.013
    [Abstract](1006) [HTML](0) [PDF 1.06 M](262)
    Abstract:
    Melting processes are calculated using the molecular dynamics simulation method. Melting points are obtained using the radial distribution function, potential energytemperature, and bondpair analysis. The characteristics of these different methods are analyzed by comparing calculated and experimental results. Tracing clusters from order to disorder can be determined easily by the radial distribution function method, but the melting point can not be obtained accurately. The potential energytemperature method is based on the principle that the distance between atoms near the melting point will have a step change, which can determine the melting points accurately. When a cluster changes from a solid to a liquid state, the microscopic structure will change significantly, providing the basis for the bondpair analysis method of determining the melting point.
    14  Effect of space velocity on the performance of methane steam reforming in a plate microchannel reactor
    QI Bo LI Longjian WANG Feng PENG Chuan ZENG Bin
    2009, 32(1):71-75. DOI: 10.11835/j.issn.1000-582X.2009.01.014
    [Abstract](864) [HTML](0) [PDF 1.55 M](200)
    Abstract:
    A 2D numerical simulation is conducted on the steam reforming reaction in a plate microreactor by applying the general finite reaction rate model in the CFD software FLUENT and a detailed surface reaction kinetics mechanism. Catalyst space velocity(CSV) and gas space velocity(GSV) inlet mixture impact on the reaction is discussed. During the calculations, the space reaction effect is ignored and only the reaction of CH4 on catalytic surface is taken into account. Calculation results show that lower CSV or GSV can achieve highefficiency conversion of CH4 and H2 output; besides CSV and GSV, channel height is an important factor for the reforming performance of plate microreactors.
    15  Pyrolysis and kinetics characteristics of typical crop biomasses
    RAN Jingyu ZENG Yan ZHANG Li PU Ge TANG Qiang
    2009, 32(1):76-81. DOI: 10.11835/j.issn.1000-582X.2009.01.015
    [Abstract](923) [HTML](0) [PDF 1.04 M](305)
    Abstract:
    It is necessary to study the process of biomass pyrolysis in order to use it efficiently. The pyrolysis characteristics and pyrolysis kinetics parameters of four typical crop biomasses (rice shell, rice haulm, corn core and corn haulm) are studied using thermogravimetric analysis (TGA). Results indicate that biomass pyrolysis process may be divided into three stages: the preheating dry stage, the volatile matter separation stage, and the carbonization stage. Thermal weight loss mainly occurs at the volatile matter separation stage. Because the biomass has higher volatile matter and lower fixed carbon, its pyrolysis is quite thorough. The rank order of the synthesized pyrolysis characteristic index is rice shell, corn core, rice haulm, and corn haulm. At the same time, the pyrolysis process can be divided into two stages. The volatile matter separates out fiercely in the initial pyrolysis period with an obvious peak and lower activation energy, while there is no obvious peak and the activation energy reaches higher in the later pyrolysis period. For coal residue, because of its lower volatile matter and higher ash, the ash hinders the volatile matter proliferation to a certain extent in the initial pyrolysis period, causing difficulty in separation of the volatile matter. Secondary volatile matter separations concurrently happen near the end of the pyrolysis period. The pyrolysis characteristics of sludge is similar to biomass. In addition, the pyrolysis reaction follows the R2 model for rice shell and corncob in the first prolysis stage. The pyrolysis reaction is in line with a response model for the other biomasses and the rest various stages. The threedimensional spherical symmetry subordinates to the proliferation mechanism for coal residue in the initial pyrolysis stage. The pyrolysis reaction is governed by the liquefaction reaction. The progression of chemical reaction is 3/2 in the later pyrolysis stage. The sludge adheres to the simple reaction order mechanism.
    16  Heating performance of a jettingmixing lowpressure heater
    TONG Mingwei WANG Zhiyuan HE Dalin
    2009, 32(1):82-85. DOI: 10.11835/j.issn.1000-582X.2009.01.016
    [Abstract](715) [HTML](0) [PDF 1.00 M](302)
    Abstract:
    Heating simulation experiments on the lowpressure heating system of a power plant are carried out, including experiments on the jetting and heating performance of a jettingmixing lowpressure heater with the structurearea ratios of m=10.56, 4.69, 2.64, and 1.69, and a practical heating experiment with inlet hydraulic pressure at 0.17 MPa to 0.22 MPa. When 120 L/h water ejected the steam with 34 kg/h as m=10.56, and when 170 L/h ejected the steam with 33 kg/h as m=4.69, the outlet hydraulic temperature of the heater could exceed 106 ℃, which is superior to the heating performance of existing heater systems. The results of jetting experiment when the inlet pressure is at 0.05 MPa to 0.6 MPa indicate that it is safe and feasible to use the jettingmixing lowpressure heater in lowpressure heating systems.
    17  Performance analysis of a concentrating solar hybrid photovoltaicthermal system
    CUI Wenzhi YU Songqiang LIAO Quan
    2009, 32(1):86-90. DOI: 10.11835/j.issn.1000-582X.2009.01.017
    [Abstract](1044) [HTML](0) [PDF 1.04 M](1502)
    Abstract:
    The photovoltaic components of a hybrid photovoltaicthermal (PV/T) system are combined with a solar thermal collector, which generates both thermal and electrical energy simultaneously with a higher integrated efficiency. A threedimensional steady model of the concentrating solar PV/T system which has a platetype metallic thermal collector with a serpentine rectangular channel is developed. The processes of photovoltaic and thermal transformation and heat transfer in the PV/T collector are calculated and simulated. The effects of the optical concentrating ratio, coolant mass flow rate, ambient air velocity and glass cover on both thermal and electrical performance of the collector are presented and discussed.
    18  Simulation of the constant modulus blind equilibrium algorithm with variable stepsize based on the mean square error
    TAN Xiaoheng ZHANG Kai HU Youqiang
    2009, 32(1):91-95. DOI: 10.11835/j.issn.1000-582X.2009.01.018
    [Abstract](912) [HTML](0) [PDF 2.32 M](1161)
    Abstract:
    The mathematic models and basic theory of constant modulus algorithm (CMA) for blind channel equalization are introduced. An improved algorithm with variable step size is proposed based on CMA. The improved algorithm uses the mean square error (MSE) to obtain the new variable stepsize to solve the contradiction between the convergence rate and accuracy in traditional CMA with fixed step. To smooth the MSE learning curve for easy comparison, an ensemble average technique is used to analyze the performance of convergence with different step sizes. The theoretical analysis and the simulation results show that the improved algorithm is superior to the traditional constant modulus(CM) in terms of convergence speed and residual error.
    19  Robust adaptive control for nonlinear chaotic systems
    HE Naibao  JIANG Changsheng GAO Qian
    2009, 32(1):96-99. DOI: 10.11835/j.issn.1000-582X.2009.01.019
    [Abstract](691) [HTML](0) [PDF 1005.38 K](1277)
    Abstract:
    Tracking control of a nonlinear uncertain Chua's chaotic system is studied. With coordinate transform, Chua's chaotic system is transformed to a general form of a strictfeedback control system. Combining the backstepping method with robust control technology, an adaptive parameter control law for a robust output feedback control scheme is developed for output tracking of nonlinear unknown systems. It is shown that the derived robust adaptive controller based on Lyapunov stability theory can guarantee global uniformly bounded ultimate property for all states of the closedloop system, and lead to tracking error decreasing at exponential speed. The simulation results show the effectiveness of the proposed approach.
    20  Analysis and simulation of a novel energy saving mechanism based on IEEE802.16e
    TANG Chaowei FU Mingyi SHAO Yanqing YANG Yongqi ZHAO Lijuan
    2009, 32(1):100-104. DOI: 10.11835/j.issn.1000-582X.2009.01.020
    [Abstract](830) [HTML](0) [PDF 1.22 M](1156)
    Abstract:
    The arrival time of data received by a mobile station in IEEE 802.16e is stochastic. When the arrival rate is low, the shorter initial sleep time (Tmin) and the maximal sleep time (Tmax) will lead to the mobile station being awakened frequently, which increases the average listening times and consumes more energy. On the other hand, when the arrival rate is high, longer Tmin and Tmax lead to longer response times. To address these problems, a novel adaptive energy saving mechanism is proposed. Firstly, Tmin and its corresponding Tmax are initialized. The mumber of Tmax which the mobile station lasted in a sleep mode is denoted as J. The realtime Tmin is defined as R(Tmin) when the mobile station is in a sleep mode. R(Tmin) is determined by J which representd the Tmax of the former sleep mode. As a result, Tmin is adjusted adaptively, and the average listening times are reduced. A Markov chain is adopted to analyze the above adaptive energy saving mechanism. The simulation results demonstrate the effectiveness of the proposed energy saving mechanism.
    21  A radial basis function neural network based selfadapting predictive decoupling control system for gas collector pressure in coke ovens
    ZHANG Shifeng ZHOU Jianfang
    2009, 32(1):105-110. DOI: 10.11835/j.issn.1000-582X.2009.01.021
    [Abstract](824) [HTML](0) [PDF 1.09 M](1471)
    Abstract:
    Pressure is measured at different levels in the loop layer because selfadapting predictive decoupling control systems are strongly coupled, disturbed, and nonlinear and there is a long time delay for gas collector pressure systems in coke ovens. By combing the traditional neural network control and proportional integral differential(PID) controllers based on radial basis function(RBF) neural network identification, the gas collector pressure is ensured to reach the desired technology range. The prediction model of an RBF neural network is used for advanced prediction of the actual output pressure to overcome delays in general gas collection. The simulation results and application indicate that the method can obtain ideal control results.
    22  Fetal electrocardiogram extraction based on radial basis function neural networks
    PU Xiujuan ZENG Xiaoping CHEN Yuejun YU Wei HAN Liang CHENG Jun
    2009, 32(1):111-115. DOI: 10.11835/j.issn.1000-582X.2009.01.022
    [Abstract](1130) [HTML](0) [PDF 1.38 M](1397)
    Abstract:
    A novel method for extracting fetal electrocardiogram (FECG) from the abdominal composite signal of a pregnant woman is proposed. The maternal component in the abdominal electrocardiogram (ECG) signal is a nonlinearly transformed version of the mother's ECG (MECG). This nonlinear relationship was identified using radial basis function (RBF) neural networks. The FECG is extracted by subtracting the nonlinearly transformed version of the MECG from the abdominal ECG signal. The baseline shift and noise in the FECG are suppressed by wavelet packet denoising technique. Experimental results obtained from the actual ECG signals demonstrate the effectiveness of the proposed method in extracting FECG even when it is totally embedded within the maternal(QRS) complex.
    23  A contour extraction algorithm for digital images based on water balloons snake model
    LUO Xiaogang HUANG Qian PEN Chenglin LIU Ting YIN Peng WEN Li GAO Yunhua
    2009, 32(1):116-120. DOI: 10.11835/j.issn.1000-582X.2009.01.023
    [Abstract](903) [HTML](0) [PDF 2.52 M](1019)
    Abstract:
    Due to weak edges and low contrast areas in digital images, such as a left ventricle in Magnetic Resonance Imaging (MRI) images, a deformation curve may leak from the outer boundary when images are segmented using the traditional snake model. An improved algorithm based on the water balloons snake model is introduced to solve this problem. Firstly, the barycenter and the boundary shape area of the left ventricle in a digital MRI image are obtained through mathematical morphology. The left ventricular watershed line is obtained next using a watershed transform algorithm, which is taken as the initial deformation curve in a balloon snake model to capture the contour. Different snake models are tested to digitallytagged MRI images of left ventricles of small pigs. Contrast results indicate that the water balloons snake model can solve the leakage problem in traditional snake and balloon snake models. In addition, the processing speed is improved significantly.

    Current Issue


    Volume , No.

    Table of Contents

    Archive

    Volume

    Issue

    Most Read

    Most Cited

    Most Downloaded