Abstract:Based upon screw theory and set theory, and according to the constraint system between mobile platforms and limbs, the structural conditions of nonoverconstrained planar 2T1R parallel mechanisms are proposed. Six types of limb constraint patterns are fou

Abstract:To obtain the distribution characteristic of the temperature on the surface of worm gear, a numerical simulation using heat transfer theory, tribology theory, and mesh theory is given to calculate the heat transfer coefficient and heat flux of rolling gea

Abstract:With a focus on a Changan hybrid electric vehicle (HEV) with an integrated startor and generator (ISG), strategies for braking force distribution and coordinated pressure control are put forward, and a dynamic braking control model is constructed for off

Abstract:A type of cluster mode of networked platforms is advanced to integrate distributed networked platforms so as to optimize the distributed resources used. The cluster architecture is established. The integration framework and main supporting technology conc

Abstract:A networked sharing application system for reverse engineering is proposed. It is targeted at a wide distribution of small and medium manufacturing enterprises and the technology complexity of reverse product design. Making full use of modern information

Abstract:A finite element model of an automobile seat structure is established using Hypermesh. The statics and dynamics of the seat structure are performed through simulation based on GB 15083—1994, which is a motor vehiclesseat systemstrength regulation and te

Abstract:Antislip regulation (ASR) systems can maintain the slip rate within a certain range when a vehicle accelerates on low adhesive road surfaces and thus prevent the drive wheels from rotating uncontrollably. Hillstart assist control (HAC) systems, the late

Abstract:An optimal computing model for detecting poor insulators has been developed based on an inverse problem in local electrical fields. The model takes into consideration the fact that electrical field measurement for insulators requires measuring many points

Abstract:Four physical models of typical internal insulation defects in 110 kV cable joints are designed and a test platform for partial discharge (PD) research on cable accessories also is constructed. Based on the models, plenty of PD data are obtained for vario

Abstract:We introduce a particle swarm optimization (PSO) algorithm and verified it using the Shubert function. The PSO algorithm is applied to design optimization of permanent magnet DC motors (PMDCMs). The optimal objects, decision variables and restricted condi

Abstract:A simulation model for evaluation of conducted electromagnetic interference(EMI) is developed based on analysis of the mechanism giving rise to conducted EMI. The simulation model includes high frequency effects associated with stray distributed parameter

Abstract:Numerical models of typical 500 kV ultrahigh voltage (UHV) transmission lines are set up in ABAQUS/CAE software. The dynamic response of the transmission lines with different structure parameters under various iceshedding load cases are analyzed, and th

Abstract:A good method for creating a surface borehole for withdrawing coal strata methane is to build before excavation and use during the whole process. But the excavation greatly affects the overlying rock strata, and when the excavation face passes through the

Abstract:On the basis of identifying and analyzing harmful risk factors in the urea synthesis production process of a factory, the production process is assessed and analyzed using the Dow chemical company fire and explosion index method. The related indexes are f

Abstract:We simulate the stress, displacement and the stability of an urban building under load on the top of a slope during different excavation stages. Our research is based on a perfectly elasticplastic constitutive model and applied the MohrCoulomb yield cri

Abstract:We present the development, fabrication and use of a new apparatus for testing rocklike material in plain strain stat. A major feature of the plain strain apparatus is the confining pressure applied in the pressure vessel rated to 20 MPa. The rectangular

Abstract:Boltshotcrete support and small pipe grouting technology are two important elements in the new Austrian tunneling method. We explore the application of boltshotcrete support and small pipe grouting technology in treating the Huanshanping Span Tunnel col

Abstract:We investigate the effect of CO on the blood rheology parameters and blood gas composition. Experiments are conducted under isothermal toxicity gas concentration nonradioactive conditions. We use an exposure box 0.8 m long, 0.5 m wide, and 0.5 m high. CO

Abstract:Adding organic activated bentonite to palletizing production improves the thermal stability of green balls and the iron grade of fired pellets. This addition also permits a reduction in the bentonite dosage. We study the action mechanism of the organic

Abstract:Aiming to calculate the true critical parameters of refrigerant mixtures, the Helmholtz free energy stability criterion for thermal systems is adopted to establish a calculation thermodynamic model of the true critical parameters. A novel optimization alg

Abstract:To use lowcalorie fuel oil shale efficiently, a thermogravimetric analysis experiment of Maoming oil shale is performed using the ZRY2P synthetic thermal analytical instrument. Combustion characteristics are analyzed, and the combustion characteristic

Abstract:We analyze the combustion characteristics of single component samples and mixed samples of municipal solid waste (MSW) using thermogravimetry. The ignition temperature, burnout temperature and comprehensive combustion characteristic parameters are obtaine

Abstract:Experiments are conducted using an integrative biomass pyrolysis liquefaction installation to extract liquid fuel via a fast pyrolysis of biomass. With several representative biomasses being used as raw materials, we investigate ways to affect the pyrolys